S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Mortex H41-46-26-A1BC Air Handler Hot Water Hydronic 1-1/2-2 Ton 115 VAC
- Upflow, Horizontal (right to left)
- Drain pans are manufactured of durable, non-corrosive plastic, and meet ASHRAE standards for IAQ. Pans are"dry" thus holding minimum water.
- Drain pans have primary and secondary drains for either left or right hand connections.
- Cabinet is heavy gauge embossed Gallonvanized steel substrate, with front and top panels pre-painted a durable neutral gray.
- All units are equipped with factory installed time delay relay as standard.
- All units have 1 foil faced insulation.
- All units include a 1" throw away filter.
- All electric heat units are 208/230/1/60 All hydronic heat units are 115/1/60.
- Standard units with 12 KW electric heat or larger have a factory installed circuit breaker (UL Requirement). All units 10 KW and smaller may be ordered with or without the circuit breaker option.
- All units are suitable for"0"" clearance to combustible materials.
- Electric heat units are field convertible to downflow with factory conversion kit.
- Blower assembly slides out for easy maintenance.
- Refrigeration coil connections are swaged and then factory sealed with copper caps to maintain a nitrogen holding charge.
- All hydronic units include a freeze protection switch.
- All hydronic units include a compressor lockout switch.
Item#:
H41-46-26-A1BC
Manufacturer Item:
H41-46-26-A1BC
Manufacturer:
MORTEX PRODUCTS, INC.
REFRIGERATION CIRCUIT
2- stage scroll compressors on all models
Suction line accumulator factory installed
Bi- flow filter- drier included for field installation
Integrated solid state control with Time- Temperature Defrost
Low pressure switch
Copper tube / aluminum fin coil
EASY TO INSTALL AND SERVICE
Easy Access service valves on all models
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R- 410A refrigerant
BUILT TO LAST
Baked- on powder coat finish over galvanized steel
Post- painted (black) coil fins
Coated, weather- resistant cabinet screws
Coated inlet grille with 3/8 (10mm) grille spacing for extra protection
Item#:
N4H624GKP
Manufacturer Item:
N4H624GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Copeland Scrollt compressors on all models
Suction line accumulator factory installed
Bi- flow filter- drier included for field installation
Integrated solid state control with Time- Temperature Defrost
Low pressure switch
Copper tube / aluminum fin coil
EASY TO INSTALL AND SERVICE
Easy Access service valves on all models
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R- 410A refrigerant
BUILT TO LAST
Baked- on powder coat finish over galvanized steel
Post- painted (black) coil fins
Coated, weather- resistant cabinet screws
Coated inlet grille with 3/8 (10mm) grille spacing for
extra protection
Item#:
NXH518GKP
Manufacturer Item:
NXH518GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Scroll compressors on all models
Suction line accumulator factory installed
Bi- flow filter- drier included for field installation
Integrated solid state control with Time- Temperature Defrost
Low pressure switch
Round tube / aluminum plate fin coil
EASY TO INSTALL AND SERVICE
Easy Access service valves on all models
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R- 410A refrigerant
BUILT TO LAST
Baked- on powder coat finish over galvanized steel
Post- painted (black) coil fins
Coated, weather- resistant cabinet screws
Coated inlet grille with 3/8 (10mm) grille spacing for extra protection
Item#:
N4H436GHP
Manufacturer Item:
N4H436GHP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Scroll compressors on all models
Suction line accumulator factory installed
Biflow filterdrier included for field installation
Integrated solid state control with TimeTemperature Defrost
Low pressure switch
Copper tube / aluminum fin coil
EASY TO INSTALL AND SERVICE
Easy access service valves on all models
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R410A refrigerant
BUILT TO LAST
Bakedon powder coat finish over galvanized steel
Postpainted (black) coil fins
Coated, weatherresistant cabinet screws
Coated inlet grille with 3/8 (10mm) grille spacing for
extra protection
Item#:
NXH648GKP
Manufacturer Item:
NXH648GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Scroll compressors on all models
Suction line accumulator factory installed
Bi- flow filter- drier included for field installation
Integrated solid state control with Time- Temperature Defrost
Low pressure switch
Round tube / aluminum plate fin coil
EASY TO INSTALL AND SERVICE
Easy Access service valves on all models
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R- 410A refrigerant
BUILT TO LAST
Baked- on powder coat finish over galvanized steel
Post- painted (black) coil fins
Coated, weather- resistant cabinet screws
Coated inlet grille with 3/8 (10mm) grille spacing for extra protection
Item#:
N4H418GKP
Manufacturer Item:
N4H418GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Copeland Scroll compressors on all modelsSuction line accumulator factory installed Biflow filterdrier included for field installation Integrated solid state control with TimeTemperature Defrost External high and low refrigerant service ports Copper tube / aluminum fin coil Communicating, selfconfiguring operation when used with observer Wall Control (TSTAT0101SC) Outdoor temperature sensor factory installed Compressor sound blanket standard Isolation compressor grommets Text based diagnostics with Observer Communicating Wall Control Easy access service valves on all models Innovative control box design High and low pressure switches Only two screws to access control panel Factory charged with R410A refrigerant High gloss, bakedon powder coat finish over Gallonvanized steel Postpainted (black) coil fins Coated, weatherresistant cabinet screws Coated inlet grille with 3/8 (10mm) spacing for extra protection Corner posts for extra strength and style 5 year No Hassle Replacement limited warranty 5 year parts limited warranty (including compressor and coil) With timely registration, an additional 5 year parts limitedwarranty (including compressor and coil) TSTAT0101SC This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However,proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerantcharging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates amanufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .* Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details
Item#:
TSH648GKA
Manufacturer Item:
TSH648GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Copeland Scroll compressors on all modelsSuction line accumulator factory installed Biflow filterdrier included for field installation Integrated solid state control with TimeTemperature Defrost External high and low refrigerant service ports Copper tube / aluminum fin coil Communicating, selfconfiguring operation when used with observer Wall Control (TSTAT0101SC) Outdoor temperature sensor factory installed Compressor sound blanket standard Isolation compressor grommets Text based diagnostics with Observer Communicating Wall Control Easy access service valves on all models Innovative control box design High and low pressure switches Only two screws to access control panel Factory charged with R410A refrigerant High gloss, bakedon powder coat finish over Gallonvanized steel Postpainted (black) coil fins Coated, weatherresistant cabinet screws Coated inlet grille with 3/8 (10mm) spacing for extra protection Corner posts for extra strength and style 5 year No Hassle Replacement limited warranty 5 year parts limited warranty (including compressor and coil) With timely registration, an additional 5 year parts limitedwarranty (including compressor and coil) TSTAT0101SC This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However,proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerantcharging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates amanufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .* Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details
Item#:
TSH636GKA
Manufacturer Item:
TSH636GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Copeland Scroll Ultratecht compressors on all models
Filter- drier supplied with every unit for field installation
External high and low refrigerant service ports
High and low pressure switches
Copper tube / aluminum fin coil
Self- configuring installation capabilities when used with Observes Wall Control
Outdoor temperature sensor factory installed (for use with Observer Wall Control only)
Ball Bearing PSC fan motors on all models
High performance compressor sound shield standard
Isolation compressor grommets
Text based diagnostics with Observer Wall Control
Only 2 control wires required from communicating indoor unit to condenser
Easy access service valves on all models
Innovative control box design
Only two screws to access control panel
Factory charged with R- 410A refrigerant
High gloss, baked- on powder coat finish over Galvanized steel
Post- painted (black) coil fins
Coated, weather- resistant cabinet screws
Coated inlet grille with 3/8 (10mm) spacing for extra protection
Corner posts for extra strength and style
10 year No Hassle Replacementt limited warranty 5 year parts limited warranty (including compressor and coil)
With timely registration, an additional 5 year parts limited warranty (including compressor and coil) This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However, proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerant charging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates a manufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org . * Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details.
Item#:
TCH624GK
Manufacturer Item:
TCH624GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Copeland Scroll compressors on all modelsSuction line accumulator factory installed Biflow filterdrier included for field installation Integrated solid state control with TimeTemperature Defrost External high and low refrigerant service ports Copper tube / aluminum fin coil Communicating, selfconfiguring operation when used with observer Wall Control (TSTAT0101SC) Outdoor temperature sensor factory installed Compressor sound blanket standard Isolation compressor grommets Text based diagnostics with Observer Communicating Wall Control Easy access service valves on all models Innovative control box design High and low pressure switches Only two screws to access control panel Factory charged with R410A refrigerant High gloss, bakedon powder coat finish over Gallonvanized steel Postpainted (black) coil fins Coated, weatherresistant cabinet screws Coated inlet grille with 3/8 (10mm) spacing for extra protection Corner posts for extra strength and style 5 year No Hassle Replacement limited warranty 5 year parts limited warranty (including compressor and coil) With timely registration, an additional 5 year parts limitedwarranty (including compressor and coil) TSTAT0101SC This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However,proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerantcharging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates amanufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .* Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details
Item#:
TSH642GKA
Manufacturer Item:
TSH642GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Copeland Scroll compressors on all modelsSuction line accumulator factory installed Biflow filterdrier included for field installation Integrated solid state control with TimeTemperature Defrost External high and low refrigerant service ports Copper tube / aluminum fin coil Communicating, selfconfiguring operation when used with observer Wall Control (TSTAT0101SC) Outdoor temperature sensor factory installed Compressor sound blanket standard Isolation compressor grommets Text based diagnostics with Observer Communicating Wall Control Easy access service valves on all models Innovative control box design High and low pressure switches Only two screws to access control panel Factory charged with R410A refrigerant High gloss, bakedon powder coat finish over Gallonvanized steel Postpainted (black) coil fins Coated, weatherresistant cabinet screws Coated inlet grille with 3/8 (10mm) spacing for extra protection Corner posts for extra strength and style 5 year No Hassle Replacement limited warranty 5 year parts limited warranty (including compressor and coil) With timely registration, an additional 5 year parts limitedwarranty (including compressor and coil) TSTAT0101SC This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However,proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerantcharging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates amanufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .* Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details
Item#:
TSH630GKA
Manufacturer Item:
TSH630GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
First Company 30HBXB-HW Baked-On Powder-Coated Variable Speed Hydronic Air Handler with TXV Metering Device R410A, 30000 BTU Cooling, 58900 BTU Heating, 2.5 Ton, 120 VAC
,
- Multi-function micro-processor circuit board
- Blower start relay - eliminates field installed boiler relay, allowing direct wiring from the boiler to the air handler
- Manual air vent on hot water coil
- Blower door shut-off switch
- Slide-out hot water coil for easier service
- 2-speed fan operation
- Convertible horizontal drain pan
- PisTon type metering device (standard)
- Copper tube heating and cooling coils
- Compatible with all major brands of split condensing units and heat pumps
- Primary and secondary condensate drain connections
- Factory installed filter drier
- 1" filter easily accessible
- Without pump
,
Item#:
30HBXB-HW-TXV410
Manufacturer Item:
30HBXB-HW-TXV410
Manufacturer:
FIRST CO.