Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

1-1/2, 2, 2-1/2, and 3 Tons

Upflow application only

Accessory field-installed electric heat kits available in 5, 7.5, or 10 kW

208/230-1-60 supply voltage

Cabinet exterior is galvanized sheet metal

Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193

Insulated for conditioned space (not to be installed in unconditioned spaces)

All Aluminum coils

Puron Advance refrigerant, TXV standard

Advance Distributers Pre-Painted Gallonvanized Heavy Gauge Steel Air Handler with Piston Metering and Slant Coil, 48000 BTU, 4 Ton, 20 kw, 115 VAC

Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 8" width x 10" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (B6)
• 0 and 5 kw, hot water standard stripped wire
• 17" width x 17" depth supply duct opening
• 14" width x 17-1/4" depth return duct opening
  

Fujitsu FB17TSJ07NB Air Handler 1-1/2-2 Ton R410A 208/230 VAC 7 KW 17" Wide

ndustry Standard R-410A Refrigerant
• Models featuring Electric Heat without Indoor CoolingCoil
• Quiet and efficient X-13 (ECM) motor technology
• Only 35" tall and 4-way convertible for all those tight spaces
• Available from factory in upflow and horizontal configurations
• Nominal airflow up to 0.5" eXternal static pressure with reduced airflow up to 1.0" eXternal static pressure
• Factory installed MultiFleX coils
• Sturdy steel construction with 1" [25.4 mm] of foil faced insulation for eXcellent sound and insulating characteristics
• Permanent, easily accessible and washable filter furnished standard
• Circuit breaker (standard on units with more than 11 kW) meets U.L. and cUL requirements for service disconnect
• Factory installed auXiliary electric heat provides eXact heat for indoor comfort over a variety of applications
• Fan settings for selectable, customized cooling airflow over a wide variety of applications
• Cabinet air leakage less than 2% at 1" H2O when tested in accordance with ASHRAE standard 193,
  

Fujitsu FH6024TTSASN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

Thermo Pride AH4260AE1 Air Handler Hydro 3-1/2-5 Ton ECM Motor115 VAC

Powder coated heavy-gauge steel cabinet for long lasting quality and durability
• Interlocking steel casing for rigid construction, tight joints, quiet operation and reduced heat loss
• GE ECM motor provides infinite blower speeds to increase efficiency and provide consistent airflow for a more comfortable nome
• Bottom return air in upflow position, left or right air return in horizontal position
• Foil-faced insulation for reduced noise and improved efficiency
• Horizontal drain pan built in to facilitate removal of A/C condensate
• Made in the USA,
  

Thermo Pride AH2436AE1 Air Handler Hydro 2-3 Ton ECM Motor115 VAC

Powder coated heavy-gauge steel cabinet for long lasting quality and durability
• Interlocking steel casing for rigid construction, tight joints, quiet operation and reduced heat loss
• GE ECM motor provides infinite blower speeds to increase efficiency and provide consistent airflow for a more comfortable nome
• Bottom return air in upflow position, left or right air return in horizontal position
• Foil-faced insulation for reduced noise and improved efficiency
• Horizontal drain pan built in to facilitate removal of A/C condensate
• Made in the USA,
  Thermo Pride AH2436AE1
  

Fujitsu Heating Parts AZVAFDAMPER10R Wireless Intelligent Round Damper 10"

Advance Distributers Pre-Painted Galvanized Heavy Gauge Steel Air Handler with Piston Metering and Slant Coil, 24000 BTU, 2 Ton, 12.5 kw, 208/240 VAC

Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 6" width x 9" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (A3)
• 0 and 5 kw, hot water standard stripped wire
• 13-1/2" width x 17" depth supply duct opening
• 10-1/4" width x 17-1/4" depth return duct opening

Advance Distributers Pre-Painted Gallonvanized Heavy Gauge Steel Air Handler with Piston Metering and A-Coil, 60000 BTU, 5 Ton, 25 kw, 120 VAC

Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 10" width X 10" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number
• 0 and 5 kw, hot water standard stripped wire
• 20-1/2" width X 21" depth supply duct opening
• 17-3/4" width X 22" depth return duct opening
  

Bosch BVA-48WN1-M18 Air Handler

4 Ton 18 SEER Multi-Position Factory Installed TXV
• Multi-speed ECM blower motor.
• Factory-installed TXV metering.
• Multi-position Installation - upflow or horizontal right standard;
• field convertible to horizontal left or downflow.
• Multiple electrical entry locations.
• Field-installed electric heater kits 5, 7.5, 10, 15, 20KW available as an accessory.
• Dual front panel design for ease of maintenance.
• Blower and coil easy slide out for ease of maintenance.
• Fully-insulated cabinet design.
• Horizontal and vertical condensate drain pans standard.
• Condensate drain pan is polymer with UVC inhibitor.
• Primary and secondary condensate drain fittings.
• Factory-sealed cabinet certified to achieve 2% or less air leakage rate at 1.0" water column.
• Integrated filter rack with tool-less door access.
• AHRI and ETL Listed.,
  

Advance Distributers Pre-Painted Galvanized Heavy Gauge Steel Air Handler

Multi-Position 1-1/2-2 Ton 115 VAC 3 Speed Motor TXV R22