|◀ 1 - 12 of 1433 ▶|
View:
Sid Harvey 264-48 Replacement Micro-Flow Oil Filter Element for 1A-25A Oil Filter
  • State-of-art oil filter cartridges designed for a full range of nozzle gallonages
  • Computer design gives largest surface area and most flutes for increased filtering
  • Greatest volume - more filter material than comparable filter elements
  • Change filters less frequently due to increased holding capacity
  • Non-shed design is fiber welded, does not contain bonding agents that may cause nozzle to clog
  • Y-fiber composition for increased depth filtration
  • Individually packed in bags for added protection
Sid Harvey Item #:264-48: Replaces Part #:'s : 264-1A
Item#:
264-48
Manufacturer Item:
264-48
Manufacturer:
SID HARVEY INDUSTRIES INC.
Lynn 1072 Replacement Combustion Chamber Kit for Weil McLain Go Series, (W/WT/S), 2 Thru 8 Section Oil Fired Boiler
Sid Harvey Item #:1072: Replaces Part #:'s : 2M899A
Item#:
1072
Manufacturer Item:
1072
Manufacturer:
LYNN MANUFACTURING, INC.
Suntec A-7000 Standard Fuel Oil Pump, 1/4 Inch NPTF x 1/8 Inch NPTF, 3/2 gph, 3450 rpm
  • 1-pipe installations to 6 Inch Hg vacuum
  • 2 pipe installations to 12 Inch Hg vacuum
  • Lift or gravity feed applications with 10 psi maximum inlet/return pressure
  • Suitable for #2, #1 fuel oil or kerosene
  • Mounting in any position
  • Factory set at 100 psi
  • Adjustable range 100 - 150 psi at 3450 rpm, 100 - 135 psi at 1725 rpm, models available to 200 and 300 psi
  • Right nozzle location
Sid Harvey Item #:P4-91: Replaces Part #:'s : P4-91R
Item#:
P4-91
Manufacturer Item:
A2VA-7116
Manufacturer:
SUNTEC INDUSTRIES INC
Sid Harvey Item #:4504: Replaces Part #:'s : L87-325
Item#:
4504
Manufacturer Item:
14504
Manufacturer:
R. W. BECKETT CORP
Sid Harvey Item #:.75-80A: Replaces Part #:'s : .75-80H | .75-80H-HAGO | HOL7580-.75-80A
Item#:
.75-80A
Manufacturer Item:
00075-80A1
Manufacturer:
DELAVAN
Sid Harvey Item #:4.00-45B: Replaces Part #:'s : 2G150
Item#:
4.00-45B
Manufacturer Item:
00400-45B7
Manufacturer:
DELAVAN
Sid Harvey Item #:2.50-80P: Replaces Part #:'s : 2G084
Item#:
2.50-80P
Manufacturer Item:
2.50-80P
Manufacturer:
SID HARVEY'S NOZZLES-NEWTON
Sid Harvey Item #:1.00-80A: Replaces Part #:'s : HOL10080-1.00-80A | 1.00-80H | 1.00-80H-HAGO
Item#:
1.00-80A
Manufacturer Item:
00100-80A1
Manufacturer:
DELAVAN
Monarch Nozzles 1.00-80NS Hollow Cone Oil Burner Nozzle, 1 gph, 80 deg
  • This series works best on many burners due to its exceptionally fine atomization
  • Produces a quiet stable flame
  • Widely used in 80 and 90 deg on flame retention burners Monarch produces oil burner nozzles for all oils with viscosity to 5 sq-mm/sec (cSt). Special nozzles can be used for oils with a viscosity up to 13 sq-mm/sec (cSt). All Monarch nozzles are stamped with the characteristics, subject to modification on adoption of CEN standards. Each Monarch MTD-92 nozzle is individually tested at several different production stages to assure perfect conformity with master nozzles of each series. The spray patterns (i.e. hollow cone or solid cone) described below refer to the tests carried out with a 60 deg angle at a75 mm distance from the nozzle orifice. In nozzles of a 60 deg spray angle or less, and for low flows in particular, the empty section of a hollow cone becomes smaller. The difference between hollow cone and solid cone practically disappears.
Item#:
1.00-80H
Manufacturer Item:
1.00-80NS
Manufacturer:
SID HARVEY'S NOZZLES-NEWTON
Fuel Oil Pump, 1/4 Inch NPTF x 1/8 Inch NPTF, 3/2 gph, 3450 rpm
  • REMANUFACTURED
  • 1-pipe installations to 6 Inch Hg vacuum
  • 2 pipe installations to 12 Inch Hg vacuum
  • Lift or gravity feed applications with 10 psi maximum inlet/return pressure
  • Suitable for #2, #1 fuel oil or kerosene
  • Mounting in any position
  • Factory set at 100 psi
  • Adjustable range 100 - 150 psi at 3450 rpm, 100 - 135 psi at 1725 rpm, models available to 200 and 300 psi
  • Right nozzle location
Sid Harvey Item #:P4-91R: Replaces Part #:'s : P4-91
Item#:
P4-91R
Manufacturer Item:
A2VA-7116
Manufacturer:
SID HARVEY REMANUFACTURED
Oilco OC-10 CAD Cell Eye for Oil Primary Controls
Sid Harvey Item #:R80-100: Replaces Part #:'s : 2C860
Item#:
R80-100
Manufacturer Item:
OC-10
Manufacturer:
OILCO COMPANY
|◀ 1 - 12 of 1433 ▶|
View: