Brand Name
BTU Heat
Voltage
AFUE
Configuration
Stages
Communicating
Motor Type
CFM
Width
|◀ ◀ 313 - 324 of 334 ▶ ▶|
View:

80% Low NOX Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • High temperature limit control prevents overheating
  • 1-piece pre-painted steel cabinet
  • Quieter in-shot burners
  • Innovative knobs for easy door removal and secure attachment
  • 4-position - Upflow/downflow/horizontal (left/right) installation
  • 3-position inducer elbow capability
  • Through the casing flue pipe for counterflow applications

    International Comfort Products R80MSL1102120A

    • Item#:
    R80MSL1102120A
    Manufacturer Item:
    R80MSL1102120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSL-ICP-Warranty_Misc
    R80MSL-ICP_Install
    R80MSL-ICP_Spec

    80% Multi-Speed Category I Venting Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products R80MSN0901714A

    • Item#:
    R80MSN0901714A
    Manufacturer Item:
    R80MSN0901714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSN-ICP-Warranty_Misc
    R80MSN-ICP_Install
    R80MSN-ICP_Spec

    95% Multi-Position Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/NOx emissions requirement

    International Comfort Products R95ESN1002120A

    • Item#:
    R95ESN1002120A
    Manufacturer Item:
    R95ESN1002120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R95ESN1002120A_Spec

    80% Multi-Speed Category I Venting Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products R80MSN0902120A

    • Item#:
    R80MSN0902120A
    Manufacturer Item:
    R80MSN0902120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSN-ICP-Warranty_Misc
    R80MSN-ICP_Install
    R80MSN-ICP_Spec

    92% Modulating Standard NOX Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/NOx emissions requirement

    International Comfort Products R92MSN0601714A

    • Item#:
    R92MSN0601714A
    Manufacturer Item:
    R92MSN0601714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R92MSN-ICP_Spec

    Up to 97% Multi-Speed Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartment
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products R96MSN0802120A

    • Item#:
    R96MSN0802120A
    Manufacturer Item:
    R96MSN0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R96MSN-ICP_Spec

    80% Low NOX Gas Heating Furnace 33-1/3" H x 14-3/16" W x 29" D

  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • High temperature limit control prevents overheating
  • 1-piece pre-painted steel cabinet
  • Quieter in-shot burners
  • Innovative knobs for easy door removal and secure attachment
  • 4-position - Upflow/downflow/horizontal (left/right) installation
  • 3-position inducer elbow capability
  • Through the casing flue pipe for counterflow applications

    International Comfort Products R80MSL0701412A

    • Item#:
    R80MSL0701412A
    Manufacturer Item:
    R80MSL0701412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSL-ICP-Warranty_Misc
    R80MSL-ICP_Install
    R80MSL-ICP_Spec

    Up to 97% Multi-Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartment
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products R96MSN0801716A

    • Item#:
    R96MSN0801716A
    Manufacturer Item:
    R96MSN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R96MSN-ICP_Spec

    80% Multi-Speed Category I Venting Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products R80MSN1102120A

    • Item#:
    R80MSN1102120A
    Manufacturer Item:
    R80MSN1102120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSN-ICP-Warranty_Misc
    R80MSN-ICP_Install
    R80MSN-ICP_Spec

    80% Multi-Speed Category I Venting Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products R80MSN0701716A

    • Item#:
    R80MSN0701716A
    Manufacturer Item:
    R80MSN0701716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSN-ICP-Warranty_Misc
    R80MSN-ICP_Install
    R80MSN-ICP_Spec

    80% Multi-Speed/Multi Position Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

    International Comfort Products R80ESN0451712A Gas Furnace 45K BTU 80% AFUE Single-Stage Multi-Speed/Multi Position

    Item#:
    R80ESN0451712A
    Manufacturer Item:
    R80ESN0451712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80ESN0451712A_Spec

    Up To 92.1% Standard NOX Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Single-stage gas valve and fixed-speeds, constant torque ECM.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • NOx emissions less than 40 ng/J; can be installed in California air quality management districts with a 40 ng/J NOx emission limit.
  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosion-resistant, prepainted steel cabinet

    International Comfort Products R92ESN0801716A

    • Item#:
    R92ESN0801716A
    Manufacturer Item:
    R92ESN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R92ESN-ICP-Warranty_Misc
    R92ESN-ICP_Install
    R92ESN-ICP_Spec
    |◀ ◀ 313 - 324 of 334 ▶ ▶|
    View: