A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-Rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• These ball valves employ the latest robotic welding technology
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:586W-10ST: Replaces Part #:'s : ABV5 | ABV5-062106 | V34202 | 900205 | ABV5A,
,

586W-10ST

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-Rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• These ball valves employ the latest robotic welding technology
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507
  
  

  587WAS-14ST

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable

Southwark MP2424

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable

MP3060

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable

Southwark MP3636

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable

Southwark MP3030

White Rodgers Cooling Controls Liquid Line Filter Drier

3/8" SAE
• 16 Cube
• 10 Micro
• Rated for 600 PSI
• R410A Usage
• Full Flow Fittings for Low Pressure Drop
• Protect Refrigeration Systems from Liquid and Solid Contaminants
• Moisture and Acid Removal
• Solid copper connections




ADK163

White Rodgers Cooling Controls Epoxy Powder Coated Steel Contractor Liquid Line Filter Drier

3/8' Male x Female

Extended solid copper connections

Dual access valves for faster and easier system diagnosis

Incorporates all the internal features of the premium EK

Desiccant blend - optimized for high water capacity and acid capacity

EK083MF STD

White Rodgers Cooling Controls Epoxy Powder Coated Suction Line Filter Drier

7/8" OD

Dual access valves for easy pressure readings

Activated carbon blend for soluble contaminant and wax

Solid copper connections

Corrosion resistant epoxy powder paint finish

Filtration 40 microns

Maximum Working Pressure 500 psig (35 bar)

UL/CUL File Number SA3124

ASK307S-VV-HH

White Rodgers Cooling Controls Epoxy Powder Coated Suction Line Filter Drier

3/4" OD

Dual access valves for easy pressure readings

Activated carbon blend for soluble contaminant and wax

Solid copper connections

Corrosion resistant epoxy powder paint finish

Filtration 40 microns

Maximum Working Pressure 500 psig (35 bar

UL/CUL File Number SA3124

White Rodgers Cooling Controls ASK166S-VV-HH

White Rodgers Cooling Controls Epoxy Powder Coated Suction Line Filter Drier

7/8" OD

Dual access valves for easy pressure readings

Activated carbon blend for soluble contaminant and wax

Solid copper connections

Corrosion resistant epoxy powder paint finish

Filtration 40 microns

Maximum Working Pressure 500 psig (35 bar)

UL/CUL File Number SA3124

White Rodgers Cooling Controls ASK167S-VV-HH

White Rodgers Cooling Controls Epoxy Powder Coated Bi-Directional Liquid Line Filter Drier

3/8' OD

Internal check valves allow flow and filtration in either direction, eliminates need for external check valves

High moisture and acid removal capability

Corrosion resistant epoxy powder paint finish

Approved for POE oils with Copeland compressors

Desiccant blend: optimized for high water capacity and acid capacity

BFK303S