Brand Name
Material
Size
Fitting Type
View:
Supco Bullet BPV31 Piercing Valve, 1/4 Inch, Male Flare, 500 psi
  • The only valve with a permanent type, patented gasket application
  • A sealing force of over 180 Inch-lb, torque tested with 450 lb pressure tested at 250 deg F
  • Patented valve gasket provides 50 times more sealing area than competitive o ring types
  • Corrosion resistant
  • Piercing needle is engineered for concentricity and hardness to insure perfect seating every time
  • Non-positional mounting, no adapter valve required
  • Requires only 2 Inch clearance for installation and operation
  • Install on round suction lines or uneven tubing, Install on the high side as a permanent valve on site
  • 1/4, 5/16 and 3/8 Inch outside diameter size
  • Furnished with adapter sleeves for indicated multiple use applications
  • Hex key wrench
Item#:
M13-40
Manufacturer Item:
BPV31
Manufacturer:
SEALED UNIT PARTS CO, INC
JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces.
Item#:
M17-39
Manufacturer Item:
A31004
Manufacturer:
JB INDUSTRIES
JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged. All valves are equipped with cap and one valve core (braze type, loosely assembled). Valve core is stainless steel and brass for use with all refrigerants including R-410A. Resistant to oils, alkalites, and diluted mineral acids.
  • Finger tight sealing for all male SAE connections
  • Made in the USA
Item#:
NFT5-4EA
Manufacturer Item:
NFT5-4
Manufacturer:
JB INDUSTRIES
JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged. All valves are equipped with cap and one valve core (braze type, loosely assembled). Valve core is stainless steel and brass for use with all refrigerants including R-410A. Resistant to oils, alkalites, and diluted mineral acids.
  • Finger tight sealing for all male SAE connections
  • Made in the USA
Item#:
M14-40
Manufacturer Item:
NFT5-4
Manufacturer:
JB INDUSTRIES
RectorSeal® Novent NP-R410 Pink Locking Cap for R410 Refrigerant Air Conditioner, 1/4 Inch Thread
  • Protects from serious injury or death resulting from the inhalation of dangerous gases
  • Resists crushing and removal without key
  • Corrosion resistant anodized aluminum
  • Integral neoprene o-ring resists oils and sealants
  • Torque limiter prevents overtightening
Item#:
86684EA
Manufacturer Item:
86684EA
Manufacturer:
RECTORSEAL
JB Industries A31999 Valve Core, for Use With Access Valves, Domestic
Item#:
M14-50
Manufacturer Item:
A31999
Manufacturer:
JB INDUSTRIES
JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged. All tees and crosses are tapped to receive an access core in all 1/4 Inch SAE flare ends. All pipe connections have internal braze cups for dip tube applications. All valves are equipped with cap and one valve core braze type, loosely assembled. Valve core is stainless steel and brass for use with all refrigerants including R-410A. Resistant to oils, alkalites, and diluted mineral acids.
  • Made in USA
  • Valve core pre-torqued to ARI specifications
  • Includes (1) cap and valve core per fitting
Item#:
M17-5
Manufacturer Item:
A31482
Manufacturer:
JB INDUSTRIES
JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces.
Item#:
M17-51
Manufacturer Item:
A31136
Manufacturer:
JB INDUSTRIES
JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces.
  • Generous counter bore allows removal of core if flare becomes damaged
  • All tees and crosses are tapped to receive an access core in all 1/4 Inch SAE flare ends
  • All pipe connections have internal braze cups for dip tube applications
  • Valve core is stainless steel and brass for use with all refrigerants including R-410A
  • Resistant to oils, alkylites and diluted mineral acids
  • All valves are equipped with cap and one valve core (braze type, loosely assembled)
  • Use with sil-phos alloy and copper fittings
  • Install through the side of the larger line to extend length approximately 2 Inch
  • Cap (NFT5-4) and valve core
Item#:
A31004EA
Manufacturer Item:
A31004EA
Manufacturer:
JB INDUSTRIES
JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces.
Item#:
M17-37
Manufacturer Item:
A31003
Manufacturer:
JB INDUSTRIES
JB Industries A31999-25 Valve Core, for Use With Access Valves, Domestic
Item#:
A31999-25
Manufacturer Item:
A31999-25
Manufacturer:
JB INDUSTRIES
Supco Bullet BPV21 Piercing Valve, 1/4 Inch, Male Flare, 5 psi
Item#:
M13-42
Manufacturer Item:
BPV21
Manufacturer:
SEALED UNIT PARTS CO, INC
View: