S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The Hi-E 40 is a medium efficiency pleated filter, available in 1" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.
- Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 8 performance
- Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
- Heavy-duty beverage board frame moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
- 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
- Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
- Galvanized steel pleat support
- Stronger adhesive with more bonding points
- Lower initial resistance for energy saving
- Medium efficiency pleated filter
- Made in USA
Item#:
24X25X1-PLT
Manufacturer Item:
HE40-24X25X1
Manufacturer:
AIR FILTERS
The Hi-E 40 is a medium efficiency pleated filter, available in 1" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.
- Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 10 performance
- Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
- Heavy duty beverage board frame - moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
- 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
- Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
- Galvanized steel pleat support
- Stronger adhesive with more bonding points
- Lower initial resistance for energy saving
- Medium efficiency pleated filter
- Made in USA
Item#:
22X22X1PL
Manufacturer Item:
HE40-22X22X1
Manufacturer:
AIR FILTERS
The F312 disposable panel filters are designed to withstand the demands of tough industrial and commercial applications. Purolator assures filter durability by utilizing construction features not found in traditional designs.
- Frame is produced using post-consumer recycled materials
- Safe, fast and easy installation
- The unique monobond p" frame concept involves a 1-piece frame sealed to the media under heat and pressure
- To enhance filtration capability and prevent migration of finer particles, the filter media has a skin backing and is evenly coated with a gelled adhesive
- Improved aerodynamics reduce restriction to air flow
- Filters are manufactured with superior grade fiberglass media to guarantee full depth loading and high dust holding capacity
- Larger effective filtering surface area
- Made in USA
Scan Air Filter Pleated Air Filter
- 24 x 24 x 1"
- There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
- What is MERV?
- MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
How often do I need to change my air filter?
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality,
humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters,
it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can
be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines
the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16;
the higher the MERV, the more efficient the filter is at capturing particles.
MERV 13 Pleated Air Filter 20" x 20" x 1"
MERV 13 Pleated Air Filter 20" x 20" x 1"
Item#:
21588
Manufacturer Item:
20X20X1PL MERV13
Manufacturer:
AIR FILTERS
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
Clarcor Air Filteration Polyester Fiber Air Filter, 25 x 25 x 2" An inexpensive panel filter offering improved performance over fiberglass. Moisture resistant, coated frame. Graduated density polyester media with fire retardant binder. Suitable for temperatures up to 200 degrees F. Should be changed monthly. UL listed Class II. Available in many standard 1inch and 2 inch sizes. Packaged in cases of 12.
Item#:
25X25X2PF
Manufacturer Item:
25X25X2PF
Manufacturer:
AIR FILTERS
Purolator 25x25x1PF MERV 4 Polyester Standard Air Filter 25" x 25" x 1" Made with 100% Synthetic Fibers, Heavy Duty Bevearage Board
Our long standing excellence in providing durable, top performing disposable filters is applied to the manufacturing of poly fiber P312 filters. Ideally suited for residential, commercial, or light industrial use, the polyester media was developed for situations where synthetic media products are required.
Our long standing excellence in providing durable, top performing disposable filters is applied to the manufacturing of poly fiber P312 filters. Ideally suited for residential, commercial, or light industrial use, the polyester media was developed for situations where synthetic media products are required.
- Frame is produced using post-consumer recycled materials
- The unique monobond p" frame concept involves a 1-piece frame sealed to the media under heat and pressure
- The synthetic media consists of polyester fibers bonded together in an interlocking pattern of tiny lint and dust traps and this configuration maximizes dust loading while minimizing resistance to air flow and surface loading
- Improved aerodynamics reduce restriction to air flow
- Safe, easy, fast installation
- Larger effective filtering surface area
- Classified class 2 by UL
- Filters perform best in conditions where large quantities of lint and dust are present
- The rugged construction makes these filters industry leaders in the high velocity system, prefilter market
- Made in USAPurolator 25X25X1PF
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
The Hi-E 40 is a medium efficiency pleated filter, available in 2" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.
- Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 8 performance
- Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
- Heavy-duty beverage board frame moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
- 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
- Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
- Galvanized steel pleat support
- Stronger adhesive with more bonding points
- Lower initial resistance for energy saving
- Medium efficiency pleated filter
- Made in USA
Purolator FME40 Standard Capacity Pleated Air Filter, 25 x 25 x 2"
- Medium efficiency
- Excellent pre-filter or stand-alone filter
25X25X2 P
Item#:
25X25X2 P
Manufacturer Item:
FME40-25X25X2
Manufacturer:
AIR FILTERS
The Hi-E 40 is a medium efficiency pleated filter, available in 1" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.
- Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 10 performance
- Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
- Heavy duty beverage board frame - moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
- 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
- Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
- Galvanized steel pleat support
- Stronger adhesive with more bonding points
- Lower initial resistance for energy saving
- Medium efficiency pleated filter
- Made in USA