Home  >  A/C Equipment  >  Blower Coils Air Handlers  > Air Handler Commercial 10 Ton 230/460/3 R410A Optional Drive Package

Air Handler Commercial 10 Ton 230/460/3 R410A Optional Drive Package Horizontal/Verticall 52" W x 52" D x 27" H

Item #:RHGL-120ZL 
Manufacturer Item: RHGL-120ZL
Manufacturer: FUJITSU(UNITARY)
Fujitsu RHGL-120ZL Air Handler Commercial 10 Ton
RHGL-120ZL
  • CABINETUnit cabinet should be constructed of galvanized, pre-painted steel.
  • MOTORInherently protected motors are mounted inside of insulated cabinet to reduce motor noise. A choice of motor horsepowers and drive combinations are available to allow you to meet specified CFM at various static pressures up to 2" [.498 kPa] external static pressure.
  • LOW PROFILEAllows for horizontal installation in most standard drop ceiling applications, and the movement of units through most standard doorways for addition or replacement work.
  • THERMAL EXPANSION VALVESStandard all models.
  • FILTERSOne inch [25 mm] throwaway filters are standard, but filter racks are designed to accept either one inch [25 mm] or two inch [51 mm] filters.
  • EVAPORATOR COILTwo circuit, interlaced row split coils are constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities. All coil assemblies are leak tested up to 450 PSIG [3100 kPa] internal pressure prior to installation into units.
  • REFRIGERANT CONNECTIONSField piping connections are made through a fixed post between two side access panels on either side of the unit. Allows flexibility to meet most field conditions as well as full accessibility after the installation is complete. Units may be used with two straight cool condens ing units or single circuit manifolded in the field using the copper fittings shipped with each unit. The RHGN Air Handler has not been tested, rated or certified to operate with dual residential remote heat pumps.
  • DRAIN PANThe galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations. Condensate drain connections are located on both sides of the unit allowing complete flexibility to meet most field conditions.
  • SERVICE ACCESSTwo removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves, and filters.
  • HORIZONTAL OR VERTICALAll models are designed for either application and can be installed in either position as supplied from the factory.
  • TESTINGAll units are run tested at the factory prior to shipment. Units are shipped with a holding charge of nitrogen.

    • Blower Coils Air Handlers

    Brand Name
    Fujitsu
    BTU
    120000
    Position
    Horizontal/Vertical
    Voltage
    208/230/3
    Depth
    52"
    Refrigerant
    R410A
    Width
    52"
    Height
    27"
    E397-110M

    Low Profile Condensate Pump 120 VAC 24' Lift 1/4 Gallon Tank Capacity Anti Sweat Sleeve Mounting Kit Included

    Sid Harvey E397-110M Low Profile Condensate Pump 120 VAC 24' Lift 1/4 Gallon Tank Capacity Anti Sweat Sleeve Mounting Kit Included
    Item #:
    E397-110M
    E397-111M

    Low Condensate Pump 240 VAC 24' Lift 1/4 Gallon Tank Capacity Anti Sweat Sleeve Mounting Kit Included

    Sid Harvey E397-111M Low Condensate Pump 240 VAC 24' Lift 1/4 Gallon Tank Capacity Anti Sweat Sleeve Mounting Kit Included
    Item #:
    E397-111M
    E397-112M

    Automatic Condensate Pump 120 VAC 24' Lift Anti Sweat Sleeve Mounting Kit Included

    Sid Harvey E397-112M Automatic Condensate Pump 115 VAC 24' Lift Anti Sweat Sleeve Mounting Kit Included
    Item #:
    E397-112M
    E397-114M

    Automatic Condensate Pump 240 VAC 24' Lift 1/4 Gallon Tank Capacity Anti Sweat Sleeve Mounting Kit Included

    Sid Harvey E397-114M Automatic Condensate Pump 240 VAC 24' Lift 1/4 Gallon Tank Capacity Anti Sweat Sleeve Mounting Kit Included
    Item #:
    E397-114M
    EZT-113B

    EZ Trap Kit 3/4" No/Brush Less Switch

    RectorSeal EZT-113B EZ Trap Kit 3/4" With Brush Less Switch
    RHGL-120ZL
    Air Handler Commercial 10 Ton 230/460/3 R410A Optional Drive Package Horizontal/Verticall 52" W x 52" D x 27" H
    Quantity: