S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Polyethylene foam pipe insulation. Its closed cell structure won't wick moisture and helps prevent the absorption of condensation that could cause mold to develop over time. Imcoa SS has an easy to install self seal closure system. Imcoa pipe insulation is semi-slit, and can be completely slit by hand. Imcoa SS is pre-slit with a factory applied pressure sensitive adhesive (PSA) to both seam surfaces and has a release liner for easy installation. All butt joints should be properly sealed. Imcoa and Imcoa SS are easy to cut with a knife and can be fabricated to go around p-traps and fittings.
- CFC/HCFC free
- Non-porous
- Low VOCs
- Halogen free
- Fiber free
- Resistant to mold growth
Item#:
WTT11810
Manufacturer Item:
WTT11810
Manufacturer:
ARMACELL LLC
Polyethylene foam pipe insulation. Its closed cell structure won't wick moisture and helps prevent the absorption of condensation that could cause mold to develop over time. Imcoa SS has an easy to install self seal closure system. Imcoa pipe insulation is semi-slit, and can be completely slit by hand. Imcoa SS is pre-slit with a factory applied pressure sensitive adhesive (PSA) to both seam surfaces and has a release liner for easy installation. All butt joints should be properly sealed. Imcoa and Imcoa SS are easy to cut with a knife and can be fabricated to go around p-traps and fittings.
- CFC/HCFC free
- Non-porous
- Low VOCs
- Halogen free
- Fiber free
- Resistant to mold growth
Item#:
WTT13810
Manufacturer Item:
WTT13810
Manufacturer:
ARMACELL LLC
Polyethylene foam pipe insulation. Its closed cell structure won't wick moisture and helps prevent the absorption of condensation that could cause mold to develop over time. Imcoa SS has an easy to install self seal closure system. Imcoa pipe insulation is semi-slit, and can be completely slit by hand. Imcoa SS is pre-slit with a factory applied pressure sensitive adhesive (PSA) to both seam surfaces and has a release liner for easy installation. All butt joints should be properly sealed. Imcoa and Imcoa SS are easy to cut with a knife and can be fabricated to go around p-traps and fittings.
- CFC/HCFC free
- Non-porous
- Low VOCs
- Halogen free
- Fiber free
- Resistant to mold growth
Item#:
WTT07810
Manufacturer Item:
WTT07810
Manufacturer:
ARMACELL LLC
Armaflex 520 Adhesive is an air-drying contact adhesive that is excellent for joining seams and butt joints of Armaflex pipe and sheet insulations for line temperatures up to 250 deg F. The golden color adhesive may also be used to apply Armaflex sheet insulation to flat or curved metal surfaces that will operate at temperatures up to 180 deg F.
- Air-drying, solvent-based contact adhesive for strong bonds and tight seams
- Formulated for Armaflex insulations
- Cure time - 36 hr at 250 deg F for insulated pipe, 36 hr at 180 deg F for insulated tanks and equipment
- Temperature limit - 250 deg F Armaflex pipe insulation seams and joints, 180 deg F full-bonding Armaflex sheet insulation
- 250/50 rates flame spread and smoke
Armaflex 520 Adhesive is an air-drying contact adhesive that is excellent for joining seams and butt joints of Armaflex pipe and sheet insulations for line temperatures up to 250 deg F. The golden color adhesive may also be used to apply Armaflex sheet insulation to flat or curved metal surfaces that will operate at temperatures up to 180 deg F.
- Air-drying, solvent-based contact adhesive for strong bonds and tight seams
- Formulated for Armaflex insulations
- Cure time - 36 hr at 250 deg F for insulated pipe, 36 hr at 180 deg F for insulated tanks and equipment
- Temperature limit - 250 deg F Armaflex pipe insulation seams and joints, 180 deg F full-bonding Armaflex sheet insulation
- 250/50 rates flame spread and smoke
Item#:
AAD520004
Manufacturer Item:
AAD520004
Manufacturer:
ARMACELL LLC
Armaflex 520 black Adhesive is an air-drying contact adhesive that is black in color for a cleaner visual appearance at seams. Armaflex 520 black adhesive has the same great properties of regular Armaflex 520 adhesive. It is excellent for joining seams and butt joints of Armaflex pipe and sheet insulations for line temperatures up to 250 deg F. The adhesive may also be used to apply Armaflex sheet insulation to flat or curved metal surfaces that will operate at temperatures up to 180 deg F.
- Armaflex 520 adhesive air-drying, solvent-based contact adhesive for strong bonds and tight seams
- Armaflex insulation tape black foam, pressure-sensitive seam tape
- Cure time - 36 hr at 250 deg F for insulated pipe, 36 hr at 180 deg F for insulated tanks and equipment
- Temperature limit - 250 deg F Armaflex pipe insulation seams and joints, 180 deg F full-bonding Armaflex sheet insulation
Item#:
AAD520004B
Manufacturer Item:
AAD520004B
Manufacturer:
ARMACELL LLC
Armacell WTT01212 Pipe Insulation 1/2" x 1/2" x 6' White
Polyethylene foam pipe insulation. Its closed cell structure won't wick moisture and helps prevent the absorption of condensation that could cause mold to develop over time. Imcoa SS has an easy to install self seal closure system. Imcoa pipe insulation is semi-slit, and can be completely slit by hand. Imcoa SS is pre-slit with a factory applied pressure sensitive adhesive (PSA) to both seam surfaces and has a release liner for easy installation. All butt joints should be properly sealed. Imcoa and Imcoa SS are easy to cut with a knife and can be fabricated to go around p-traps and fittings.
Polyethylene foam pipe insulation. Its closed cell structure won't wick moisture and helps prevent the absorption of condensation that could cause mold to develop over time. Imcoa SS has an easy to install self seal closure system. Imcoa pipe insulation is semi-slit, and can be completely slit by hand. Imcoa SS is pre-slit with a factory applied pressure sensitive adhesive (PSA) to both seam surfaces and has a release liner for easy installation. All butt joints should be properly sealed. Imcoa and Imcoa SS are easy to cut with a knife and can be fabricated to go around p-traps and fittings.
- CFC/HCFC free
- Non-porous
- Low VOCs
- Halogen free
- Fiber free
- Resistant to mold growth
Armacell J1-30 Pipe Insulation 3/8" x 3/8 x 6' Black Split
Armacell WTT05812 Pipe Insulation Un-Slit 5/8" x 1/2" x 6' White
Polyethylene foam pipe insulation. Its closed cell structure won't wick moisture and helps prevent the absorption of condensation that could cause mold to develop over time. Imcoa SS has an easy to install self seal closure system. Imcoa pipe insulation is semi-slit, and can be completely slit by hand. Imcoa SS is pre-slit with a factory applied pressure sensitive adhesive (PSA) to both seam surfaces and has a release liner for easy installation. All butt joints should be properly sealed. Imcoa and Imcoa SS are easy to cut with a knife and can be fabricated to go around p-traps and fittings.
Polyethylene foam pipe insulation. Its closed cell structure won't wick moisture and helps prevent the absorption of condensation that could cause mold to develop over time. Imcoa SS has an easy to install self seal closure system. Imcoa pipe insulation is semi-slit, and can be completely slit by hand. Imcoa SS is pre-slit with a factory applied pressure sensitive adhesive (PSA) to both seam surfaces and has a release liner for easy installation. All butt joints should be properly sealed. Imcoa and Imcoa SS are easy to cut with a knife and can be fabricated to go around p-traps and fittings.
- CFC/HCFC free
- Non-porous
- Low VOCs
- Halogen free
- Fiber free
- Resistant to mold growth
Armacell WTT05834 Pipe Insulation Un-Slit 5/8" x 3/4" x 6' White
Polyethylene foam pipe insulation. Its closed cell structure won't wick moisture and helps prevent the absorption of condensation that could cause mold to develop over time. Imcoa SS has an easy to install self seal closure system. Imcoa pipe insulation is semi-slit, and can be completely slit by hand. Imcoa SS is pre-slit with a factory applied pressure sensitive adhesive (PSA) to both seam surfaces and has a release liner for easy installation. All butt joints should be properly sealed. Imcoa and Imcoa SS are easy to cut with a knife and can be fabricated to go around p-traps and fittings.
Polyethylene foam pipe insulation. Its closed cell structure won't wick moisture and helps prevent the absorption of condensation that could cause mold to develop over time. Imcoa SS has an easy to install self seal closure system. Imcoa pipe insulation is semi-slit, and can be completely slit by hand. Imcoa SS is pre-slit with a factory applied pressure sensitive adhesive (PSA) to both seam surfaces and has a release liner for easy installation. All butt joints should be properly sealed. Imcoa and Imcoa SS are easy to cut with a knife and can be fabricated to go around p-traps and fittings.
- CFC/HCFC free
- Non-porous
- Low VOCs
- Halogen free
- Fiber free
- Resistant to mold growth