Brand Name
Cooling BTU
Heating BTU
Voltage
Phase
Refrigerant
SEER
Length
Width
Height
View:
Frigidaire P7RE-036K Polyester Urethane Galvanized Steel Round Duct Single Package Air Conditioner, 36000 BTU/hr, 3 ton, 208 - 230 VAC, 60 Hz, 1 PH
  • The P7 series single packaged air conditioners are high efficiency self contained cooling units that can be installed on a slab
  • Quality compressor - state of the art compressor is standard equipment
  • High pressure switches ensure long compressor life
  • Micro-channel coils both indoor and outdoor all aluminum coils are designed to optimize heat transfer, minimize size and cost and increase durability and reliability, eliminates corrosion
  • ECM blower motor fixed torque energy efficient brushless DC ECM motor
  • Permanently lubricated condenser motor - a heavy-duty PSC motor for long lasting reliability and quiet operation
  • Low voltage transformer - includes 3 amp fuse to protect low voltage circuit
  • Liquid line filter drier factory installed at a convenient location for service
  • Designed using galvanized steel with a polyester urethane coat finish, 950 hr salt spray finish is 1.5 mil thick and resists corrosion 50% better than comparable units
  • Compact footprint and profile make the P7 series easy to install and transport
  • 0 Inch clearance to combustibles on duct side of the unit allows for installations in tight areas
  • Wire guard coated with earth friendly epoxy and plastic mesh hail guard that will never rust and protects the units coil from being damaged
  • Raised base pan allows water to drain away from the unit
  • Easy compressor and control access designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from side of the unit
  • Easy access to the evaporator coil for cleaning, blower assembly removal and general maintenance
  • Drain trap design optimizes drainage capabilities
  • Removable top grille assembly - allows ease of service to the fan motor
  • Original design
Item#:
P7RE-036K
Manufacturer Item:
922414
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
TempStar PAJ430000K000A Gray Pre-Painted Steel Standard Package Air Conditioner, 28600 BTU/hr, 208 - 230 VAC, 60 Hz, 1 PH
  • Environmentally sound R-410A refrigerant
  • Liquid refrigerant filter driers
  • Copper tube/aluminum fin condenser and evaporator coils
  • Light weight, compact construction ideal for manufactured housing and residential applications
  • Hand holds built-into the unit base pan
  • Compact, fully self-contained, electric cooling unit with horizontal supply and return ducts
  • Easy panel accessibility for maintenance and installation
  • Accessory electric heaters with 1-point connections
  • Designed to be serviced from both the side and front
  • Vibration isolation provides quiet operation, compressors have internal over current protection
  • Direct-drive multi-speed, blower motor standard on all models
  • No-rust base pan with integrated drain pan standard on all units
  • Durable pre-painted steel cabinet
  • Louvered coil enclosure for protection against vandalism and hail damage
  • Aerodynamic fan blade design reduces the overall sound
  • 5 years parts limited warranty (including compressor and coils)
  • No factory heat (000)
  • Sales model digit
  • Piston metering device
Item#:
PAJ430000K000A
Manufacturer Item:
PAJ430000K000A
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
ICP PHD436000K000F Pre-Painted Steel Package Heat Pump, 3/4 hp, 35800 BTU/hr Cooling, 35800 BTU/hr Heating, 2 ton, 208/230 VAC
  • Standard
  • Standard feature code
  • Sales model digit
  • Environmentally sound R-410A refrigerant
  • Copper tube/aluminum fin condenser and evaporator coils
  • Short cycling protection for the compressor is built-into the defrost control board
  • Dehumidification mode (airflow reduction) on all models
  • Installs easily on a rooftop or at ground level
  • Easy 3-panel accessibility for maintenance and installation
  • Easily converts to down discharge applications
  • Combination electric heating and cooling
  • Direct drive high efficiency ECM blower motor on all models
  • Vertical condenser fan discharge
  • Full perimeter steel base rails
  • High/low pressure switches provide added reliability for the compressor
  • 5 years limited parts warranty
Item#:
PHD436000K000F
Manufacturer Item:
PHD436000K000F
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Arcoaire PGD424060K000E Pre-Painted Steel Mainline Package Gas/Electric Unit, 24000 BTU/hr Cooling, 60000 BTU/hr Heating, 2 ton, 208/230 VAC
  • Copper tube/aluminum fin condenser and evaporator coils
  • Dehumidification mode (airflow reduction) on all models
  • Installs easily on a rooftop or at ground level
  • Easy 3-panel accessibility for maintenance and installation
  • Easily converts to down discharge applications
  • Combination gas heating and electric cooling
  • Induced draft combustion and venting
  • High efficiency ECM indoor blower motor on all models
  • Vertical condenser fan discharge
  • Full perimeter steel base rails
  • High/low pressure switches provide added reliability for the compressor
  • Aluminized steel tubular heat exchanger
  • 10 years heat exchanger limited warranty
  • 5 years compressor limited warranty
  • 1 year parts limited warranty
  • Sales model digit
Item#:
PGD424060K000E
Manufacturer Item:
PGD424060K000E
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Item#:
PGD436090K000G
Manufacturer Item:
PGD436090K000G
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Item#:
PGD424060K000G
Manufacturer Item:
PGD424060K000G
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Item#:
PGD430060K000G
Manufacturer Item:
PGD430060K000G
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Arcoaire PGD436090K000E Pre-Painted Steel Standard Package Gas/Electric Unit, 36000 BTU/hr Cooling, 90000 BTU/hr Heating, 208 - 230 VAC, 3 ton
  • Copper tube/aluminum fin condenser and evaporator coils
  • Dehumidification mode (airflow reduction) on all models
  • Installs easily on a rooftop or at ground level
  • Easy 3-panel accessibility for maintenance and installation
  • Easily converts to down discharge applications
  • Combination gas heating and electric cooling
  • Induced draft combustion and venting
  • High efficiency ECM indoor blower motor on all models
  • Vertical condenser fan discharge
  • Full perimeter steel base rails
  • High/low pressure switches provide added reliability for the compressor
  • Aluminized steel tubular heat exchanger
  • 10 years heat exchanger limited warranty
  • 5 years compressor limited warranty
  • 1 year parts limited warranty
  • Sales model digit
Item#:
PGD436090K000E
Manufacturer Item:
PGD436090K000E
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Arcoaire PGS430060KGP0E Pre-Painted Steel Standard Package Gas Electric Unit, 30000 BTU/hr Cooling, 60000 BTU/hr Heating, 2.5 ton, 208/230 VAC
  • Copper tube/aluminum fin condenser and evaporator coils
  • Dehumidification mode (airflow reduction) on all models
  • Installs easily on a rooftop or at ground level
  • Easy 3-panel accessibility for maintenance and installation
  • Easily converts to down discharge applications
  • Combination gas heating and electric cooling
  • Induced draft combustion and venting
  • High efficiency ECM indoor blower motor on all models
  • Vertical condenser fan discharge
  • Full perimeter steel base rails
  • High and low pressure switches provide added reliability for the compressor
  • Stainless steel heat exchanger
  • 10 years heat exchanger limited warranty
  • 5 years compressor limited warranty
  • 1 year parts limited warranty
  • Sales model digit
Item#:
PGS430060KGP0E
Manufacturer Item:
PGS430060KGP0E
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Frigidaire P7RE-030K Polyester Urethane Galvanized Steel Round Duct Single Package Air Conditioner, 30000 BTU/hr, 2.5 ton, 208 - 230 VAC, 60 Hz, 1 PH
  • The P7 series single packaged air conditioners are high efficiency self contained cooling units that can be installed on a slab
  • Quality compressor - state of the art compressor is standard equipment
  • High pressure switches ensure long compressor life
  • Micro-channel coils both indoor and outdoor all aluminum coils are designed to optimize heat transfer, minimize size and cost and increase durability and reliability, eliminates corrosion
  • ECM blower motor fixed torque energy efficient brushless DC ECM motor
  • Permanently lubricated condenser motor - a heavy-duty PSC motor for long lasting reliability and quiet operation
  • Low voltage transformer - includes 3 amp fuse to protect low voltage circuit
  • Liquid line filter drier factory installed at a convenient location for service
  • Designed using galvanized steel with a polyester urethane coat finish, 950 hr salt spray finish is 1.5 mil thick and resists corrosion 50% better than comparable units
  • Compact footprint and profile make the P7 series easy to install and transport
  • 0 Inch clearance to combustibles on duct side of the unit allows for installations in tight areas
  • Wire guard coated with earth friendly epoxy and plastic mesh hail guard that will never rust and protects the units coil from being damaged
  • Raised base pan allows water to drain away from the unit
  • Easy compressor and control access designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from side of the unit
  • Easy access to the evaporator coil for cleaning, blower assembly removal and general maintenance
  • Drain trap design optimizes drainage capabilities
  • Removable top grille assembly - allows ease of service to the fan motor
  • Original design
Item#:
P7RE-030K
Manufacturer Item:
922413
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Item#:
RSPMA036JK000
Manufacturer Item:
RSPM-A036JK000
Manufacturer:
FUJITSU(UNITARY)
Item#:
W24AB-A05ZPXXXJ
Manufacturer Item:
W24AB-A05ZPXXXJ
Manufacturer:
BARD MFG COMPANY INC.
View: