Brand Name
Type
Length
Diameter
Fuel Type
Material
Includes
|◀ 1 - 12 of 391 ▶|
View:
Centrotherm Eco Systems INNOFLUE IANS2 SW Residential Connector Ring, 2 Inch ID x 3.2 Inch OD Dia.
Item#:
IANS02
Manufacturer Item:
IANS02
Manufacturer:
CENTROTHERM ECO SYSTEMS
Hart & Cooley 4REA90 0.012 Inch Aluminum Inner and 0.018 Inch G90 Galvanized Steel Outer Round 90 deg Adjustable Elbow, 4 Inch
  • Locking band
Item#:
4REA90
Manufacturer Item:
016108
Manufacturer:
HART & COOLEY, INC.
Centrotherm Eco Systems ISELL0287 Gray Polypropylene Single Wall Large Radius 87 deg Vent Elbow, 2 Inch
  • Industry leading 2 mm wall thickness provides impact protection
  • Polypropylene is highly corrosion resistant, making it suitable for both gas and oil fired appliances
  • Zero clearance to combustibles
  • PPs-UV black termination components provide enhanced UV protection
  • High quality joint connections for a consistently tight fit up
  • No adhesives required
  • Allows for post installation adjustments
  • Immediate use of appliance upon installation
  • Light weight allows for ease of handling and installation
  • Reduced labor costs up to 75%
  • No special tools required
  • No solvent based PVC or CPVC adhesives per IE credit 4.1
Item#:
ISELL0287
Manufacturer Item:
ISELL0287
Manufacturer:
CENTROTHERM ECO SYSTEMS
Centrotherm Eco Systems INNOFLUE ISELL245 Long Elbow, 45 deg, Polypropylene
  • For greater offsets or changes in the direction of the vent system
  • 2.2 Inch centerline offset
  • 3.8 Inch effective length
Item#:
ISELL0245
Manufacturer Item:
ISELL0245
Manufacturer:
CENTROTHERM ECO SYSTEMS
Centrotherm Eco Systems Innoflue IANS03 Steel Locking Connector Ring for Innoflue Single Wall (SW) Connections (Pipe to Pipe, Pipe to Fitting, Pipe to Adapter, etc), 3 Inch
  • Provides reinforcement at joints to support loads of up to 99 lb
  • 32 - 230 deg F maximum temperature
Item#:
IANS03
Manufacturer Item:
IANS03
Manufacturer:
CENTROTHERM ECO SYSTEMS
An economical venting system used for relining masonry chimney for natural gas or liquid propane category, draft hood equipped appliances and appliances tested and listed to use Type B gas vent for a wide range of applications, including natural gas fireplaces, gas-fired furnaces, boilers, water heaters, and wall or space heating applications. Protects the masonry chimney from damaging effects of flue product condensation.
  • DuraFlex aluminum is designed for flexible relining masonry chimneys when using natural gas or liquid propane
  • 1-wall construction
  • 0 Inch clearance to masonry
  • DuraFlex aluminum length, duraflex aluminum cap, duraflex top plate, and duraflex mortar sleeve included
  • Limited lifetime warranty
  • Includes DuraFlex AL length, DuraFlex AL cap, DuraFlex top plate and, DuraFlex mortar sleeve
Sid Harvey Item #:TLK0535: Replaces Part #:'s : 24682
Item#:
TLK0535
Manufacturer Item:
5DFA-35K
Manufacturer:
DURAVENT, INC.
Hart & Cooley 4RP5 Galvanized Aluminum Type B Round Gas Vent Pipe, 4 Inch, 60 Inch L
  • 3 - 12 Inch pipe and fitting couplers overlap 1-3/8 Inch when joined together therefore, assembled length is 1-3/8 Inch less than listed length
  • Deep locking groove assures solid joint and secure lock
  • Corrosion resistant aluminum inner wall for rapid warm-up
  • Unique locking band provides 360 deg turning radius of the pipe and fittings
  • Locking band slides over tabs easily, locks firmly without twisting
  • Locking tabs hold pipe securely together, can be easily unlocked
  • Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
  • Reinforced ends curled bead on end of outer pipe for rigidity and strength
  • The allowable minimum clearance to combustibles is 1 Inch
  • A full set of installation instructions are supplied with caps and supports
Item#:
4RPX5
Manufacturer Item:
016100
Manufacturer:
HART & COOLEY, INC.
Hart & Cooley 4RPX12 0.012 Inch Aluminum Inner and 0.018 Inch G90 Galvanized Steel Outer Round Pipe, 4 Inch, 12 Inch L
  • 3 - 12 Inch pipe and fitting couplers overlap 1-3/8 Inch when joined together therefore, assembled length is 1-3/8 Inch less than listed length
  • A full set of installation instructions are supplied with caps and supports
  • Unique locking band provides 360 deg turning radius of the pipe and fittings
  • Locking band slides over tabs easily, locks firmly without twisting. Locking tabs hold pipe securely together, can be easily unlocked
  • Reinforced ends - curled bead on end of outer pipe for rigidity and strength
  • Deep locking groove assures solid joint and secure lock
  • Corrosion resistant aluminum inner wall for rapid warm-up
  • Galvanized steel outer pipe for maximum protection
  • Positive stop: provides proper alignment and positive fit for mating end of pipe or fitting
  • UL listed for installation in 2 x 6 wall
Item#:
4RPX12
Manufacturer Item:
016105
Manufacturer:
HART & COOLEY, INC.
Centrotherm Eco Systems Innoflue ISVL021 Gray Polypropylene/EPDM Striaght Single Wall Vent Pipe, 2 Inch, 12 Inch L
  • The only 1-wall polymeric vent system listed to the rigorous UL-1738 safety standard
  • Centrotherm is full expertise and industry support
  • Industry leading 2 mm wall thickness provides impact protection
  • Polypropylene is highly corrosion resistant, making it suitable for both gas and oil fired appliances
  • Zero clearance to combustibles
  • PPs-UV black termination components provide enhanced UV protection
  • Light weight allows for ease of handling and installation
  • Reduced labor costs up to 75%
Item#:
ISVL021
Manufacturer Item:
ISVL021
Manufacturer:
CENTROTHERM ECO SYSTEMS
Centrotherm Eco Systems Innoflue ISVL022 Gray Polypropylene/EPDM Striaght Single Wall Vent Pipe, 2 Inch, 24 Inch L
  • The only 1-wall polymeric vent system listed to the rigorous UL-1738 safety standard
  • Centrotherm is full expertise and industry support
  • Industry leading 2 mm wall thickness provides impact protection
  • Polypropylene is highly corrosion resistant, making it suitable for both gas and oil fired appliances
  • Zero clearance to combustibles
  • PPs-UV black termination components provide enhanced UV protection
  • Light weight allows for ease of handling and installation
  • Reduced labor costs up to 75%
Item#:
ISVL022
Manufacturer Item:
ISVL022
Manufacturer:
CENTROTHERM ECO SYSTEMS
Centrotherm Eco Systems Innoflue ISVL023 Gray Polypropylene/EPDM Striaght Single Wall Vent Pipe, 2 Inch, 36 Inch L
  • The only 1-wall polymeric vent system listed to the rigorous UL-1738 safety standard
  • Centrotherm is full expertise and industry support
  • Industry leading 2 mm wall thickness provides impact protection
  • Polypropylene is highly corrosion resistant, making it suitable for both gas and oil fired appliances
  • Zero clearance to combustibles
  • PPs-UV black termination components provide enhanced UV protection
  • Light weight allows for ease of handling and installation
  • Reduced labor costs up to 75%
Item#:
ISVL023
Manufacturer Item:
ISVL023
Manufacturer:
CENTROTHERM ECO SYSTEMS
Centrotherm Eco Systems Innoflue ISVL026 Gray Polypropylene/EPDM Striaght Single Wall Vent Pipe, 2 Inch, 72 Inch L
  • The only 1-wall polymeric vent system listed to the rigorous UL-1738 safety standard
  • Centrotherm is full expertise and industry support
  • Industry leading 2 mm wall thickness provides impact protection
  • Polypropylene is highly corrosion resistant, making it suitable for both gas and oil fired appliances
  • Zero clearance to combustibles
  • PPs-UV black termination components provide enhanced UV protection
  • Light weight allows for ease of handling and installation
  • Reduced labor costs up to 75%
Item#:
ISVL026
Manufacturer Item:
ISVL026
Manufacturer:
CENTROTHERM ECO SYSTEMS
|◀ 1 - 12 of 391 ▶|
View: