Brand Name
Inlet Size
Outlet Size
Rotation
Max Pressure
Flow Rate
Stages
Speed
Mount
UPC
View:
Suntec A-7000 Standard Fuel Oil Pump, 1/4 Inch NPTF x 1/8 Inch NPTF, 3/2 gph, 3450 rpm
  • 1-pipe installations to 6 Inch Hg vacuum
  • 2 pipe installations to 12 Inch Hg vacuum
  • Lift or gravity feed applications with 10 psi maximum inlet/return pressure
  • Suitable for #2, #1 fuel oil or kerosene
  • Mounting in any position
  • Factory set at 100 psi
  • Adjustable range 100 - 150 psi at 3450 rpm, 100 - 135 psi at 1725 rpm, models available to 200 and 300 psi
  • Right nozzle location
Sid Harvey Item #:P4-91: Replaces Part #:'s : P4-91R
Item#:
P4-91
Manufacturer Item:
A2VA-7116
Manufacturer:
SUNTEC INDUSTRIES INC
Fuel Oil Pump, 1/4 Inch NPTF x 1/8 Inch NPTF, 3/2 gph, 3450 rpm
  • REMANUFACTURED
  • 1-pipe installations to 6 Inch Hg vacuum
  • 2 pipe installations to 12 Inch Hg vacuum
  • Lift or gravity feed applications with 10 psi maximum inlet/return pressure
  • Suitable for #2, #1 fuel oil or kerosene
  • Mounting in any position
  • Factory set at 100 psi
  • Adjustable range 100 - 150 psi at 3450 rpm, 100 - 135 psi at 1725 rpm, models available to 200 and 300 psi
  • Right nozzle location
Sid Harvey Item #:P4-91R: Replaces Part #:'s : P4-91
Item#:
P4-91R
Manufacturer Item:
A2VA-7116
Manufacturer:
SID HARVEY REMANUFACTURED
Single Stage CleanCut Pump 3 GPH 120V. The new Beckett CleanCut Pump--developed as a joint effort with Suntec Industries--combines the 'clean burning' benefits of a solenoid valve with the hefty lift capabilities of traditional American pumps. The solenoid valve cuts oil flow almost instantly when power is cut to the motor, eliminating coasting stops that can cause soot formation on shut-down. Pre-purge type controls work hand-in-hand with the CleanCut pump to establish airflow and bring pump pressure up to full operating levels before light-off. this ensures smoother and cleaner light-offs. There are fewer moving parts, compared to conventional pumps and fewer troublesome oil fittings to cause problems. In addition, all of the moving parts in the CleanCut have been in use for years either in the US or in Europe. Configurations using an external valve deadhead pressure against the valve during start-up, increasing load on the motor. The CleanCut pump reduces demands on the motor during start-up by allowing oil to freely bypass the pump's piston. The unique design of the CleanCut pump delivers up to 4 gallons per hour at 100 psi. (Note that applications above 3 gph will require an additional valve due to UL requirements). The CleanCut pump utilizes the same piston valve used in traditional pumps, to provide the same level of protection from leak-through in gravity feed situations.
  • Used With: Beckett CleanCut Pump
  • Max Pressure (PSI): 200
  • Voltage: 120 VAC
  • Flow Rate (GPH): 3
  • Replaces: 2184404U , A2EA6527
Item#:
PF10322U
Manufacturer Item:
A2EA-6527
Manufacturer:
R. W. BECKETT CORP
Riello C7001010 Pump for F3, F5, F10, M3, M5 and M10 Oil Burner
Sid Harvey Item #:7001010: Replaces Part #:'s : 4H569
Item#:
7001010
Manufacturer Item:
7001010
Manufacturer:
RIELLO CORP OF AMERICA
Suntec A2EA-6520-8 1-Stage Clean Cut Oil Pump, 4 gph at 100 - 150 psi, 3 gph at 150 - 200 psi, 3600 rpm, 10 psi Inlet and Return
  • 36 Inch-oz breakaway torque
  • 6 Inch Hg vacuum limit
  • The solenoid valve cuts oil flow almost instantly when power is cut to the motor, eliminating coasting stops that can cause soot formation on shut-down Greater reliability
  • Increased capacity
  • Protection from leaks
  • Includes built-in solenoid valve
  • 2 years limited warranty
Item#:
P4-198R
Manufacturer Item:
A2EA-6528
Manufacturer:
SID HARVEY REMANUFACTURED
Suntec A-3000 Fuel Oil Pump, 1/4 Inch NPTF x 1/8 NPTF, 4 gph, 3450 rpm
  • Right hand - nozzle port location and rotation
  • 1/8 Inch NPTF pressure gauge/bleeder valve port
  • Valve function pressure regulation
  • Cut-off - diaphragm and solenoid, 3 gph strainer
  • Pressure adjustable (100 - 150 psi low fire, 150 - 200 psi high fire)
  • Suction height single pipe : 6 Inch Hg maximum vacuum, 2-pipe: 12 Inch Hg maximum vacuum, to prevent air separation from oil
  • A-3000 model has a unique circuit that contains 2 separate cut-on and cutoff mechanisms
  • The pump circuit contains a positive displacement involute gear set and 4 controlling valves
  • Hydraulic data - 70 watt at 100 psi, 90 watt at 150 psi power consumption
Sid Harvey Item #:A2VA-3006: Replaces Part #:'s : 1P312
Item#:
A2VA-3006
Manufacturer Item:
A2VA-3006
Manufacturer:
SUNTEC INDUSTRIES INC
Riello 3005906 New Style Pump For 1-Stage Operation Oil Burner
Sid Harvey Item #:P4-150R: Replaces Part #:'s : Q4-150
Item#:
P4-150R
Manufacturer Item:
3005906
Manufacturer:
SID HARVEY REMANUFACTURED
Suntec B-8000 2-Stage Oil Pump for Use with Oil Burner, 7 gph at 100 psi
  • Right hand - nozzle port location and rotation
  • 2-pipe installations up to 17 Inch Hg vacuum
  • Lift or gravity feed applications with 10 psi maximum inlet/return pressure
  • 3 gph at 200 psi
  • Mounting in any position except upside down
Sid Harvey Item #:P4-30: Replaces Part #:'s : 4G1084
Item#:
P4-30
Manufacturer Item:
B2YA8916
Manufacturer:
SUNTEC INDUSTRIES INC
Suntec A1VA-7112 1-Stage Fuel Unit, 3 gph Strainer and Nozzle at 100 psi, 1725 rpm, 100 - 150 psi
  • Right hand nozzle port location
  • Suitable for kerosene, #1 or #2 fuel oil, not compatible with fuel blends containing more than 5% biodiesel
Sid Harvey Item #:P4-83R: Replaces Part #:'s : OPU830-P4-83 | P4-83 |
Item#:
P4-83R
Manufacturer Item:
A1VA-7112
Manufacturer:
SID HARVEY REMANUFACTURED
Suntec A7112 Dual Speed Fuel Unit, 1725/3450 rpm
  • Right hand nozzle port location
  • Adjustable rpm cut-off assures no soot on shutdown
  • Cuts your truck stock inventory in half
Sid Harvey Item #:P4-90R: Replaces Part #:'s : 1P303R
Item#:
P4-90R
Manufacturer Item:
A7112/A7116
Manufacturer:
SID HARVEY REMANUFACTURED
Suntec A-3000 Solenoid Fuel Oil Pump, 1/4 Inch NPTF x 1/8 Inch NPTF, 4/3 gph, 3450 rpm
  • 1-pipe installations to 6 Inch Hg vacuum
  • 2 pipe installations to 12 Inch Hg vacuum
  • Lift or gravity feed applications with 10 psi maximum inlet/return pressure
  • Suitable for #2, #1 fuel oil or kerosene
  • Mounting in any position
  • Factory set at 100 psi
  • Adjustable range 100 - 150 psi at 3450 rpm, 100 - 135 psi at 1725 rpm, models available to 200 and 300 psi
  • Right nozzle location
Item#:
A2VA-3006B
Manufacturer Item:
A2VA-3006B
Manufacturer:
SUNTEC INDUSTRIES INC
Item#:
P4-196R
Manufacturer Item:
A2VA-3006
Manufacturer:
SID HARVEY REMANUFACTURED
View: