Brand Name
Type
BTU Input
BTU Output
Fuel Type
Ignition Type
Millivolt
Connection Size
Vent Size
View:
Turbonics Toester T68-HA Hydronic Under-Cabinet 6/8 Kickspace Fan Coil Heater, 7700 BTU/hr Output at 180 deg F
  • Turbonics Toester 6/8 is a space saving alternative to hot water baseboard
  • Designed to fit inconspicuously under a cabinet in the floor or in the wall
  • The Toesters fan motor is a 4-pole shaded 2-speed 110 volt 60 Hz UL approved motor
  • The heat exchanger of the Turbonics 6/8 Toester kickspace heater is copper tube type with 7 aluminum fin/Inch
  • The control is a wall mountable 2-speed on and off fan switch
  • A clip-on bi-metal snap disc heat sensing aquastat turns the fan on and off automatically
  • Black or brushed stainless finish grille front
  • Low profile
  • Standard 1/2 Inch sweat connections
  • Application flexibility in confined spaces
  • High efficiency copper/aluminum heat exchanger
  • Easily accessed electrical components
  • Factory wired reverse acting aquastat
  • Ultra-low profile fan coil draws air from a 360 deg radius and operates at either 650 or 850 rpm using the Purr-Fect air wheel for optimum balance and performance
  • 5 years limited warranty
Item#:
T68-HA
Manufacturer Item:
T68-HA
Manufacturer:
TURBONICS, INC
TWIN-FLO III heaters are for use with forced hot water residential heating systems and consist of a copper tube, aluminum finned heating element, with an electric motor and blower of unique cross flow design. Their purpose is to deliver a comfortable stream of warmed air, at or near floor level, and their construction is extremely compact so minimum space is required for installation.
  • Kickspace heaters are the space-saving alternative to hot water baseboard
  • The type K heater is primarily used in horizontal floor installation, for example under a kitchen counter cabinet or bathroom sink enclosure
  • They are ideal for radiant systems with the use of a low temperature aquastat designed to turn the unit on at 11 deg F
  • Type W is for vertical mounting, fully recessed in the wall studs, with the air discharged upward through a flush mounted, louvered front panel
  • Type F is a surface mounted wall unit, with the air discharged evenly through a louvered front panel in an upward direction
  • All types have heating elements with 1/2 Inch nominal (5/8 Inch outside diameter) copper tube connections and 115 volt
  • Electric blower motor, interwired with a 12 deg F (49 deg C) reverse acting aquastat that prevents operation until hot water is circulating
  • These units are not intended to be used on one or two pipe steam systems
  • For gravity fed systems, it is recommended that a separate circulator pump be installed for the kickspace heater
  • Designed to fit inconspicuously under a cabinet, in the floor, on or in the wall
  • Hot water from the home's boiler is circulated through the kickspace unit and the fan gently blows heated air into the room
  • The homeowner simply selects the fan speed, then the unit turns on and off automatically according to heating demand
  • 53 cfm high speed
  • 32 rpm
  • .34 hp motor
Sid Harvey Item #:K42: Replaces Part #:'s : 3935
Item#:
K42
Manufacturer Item:
K42
Manufacturer:
MOTION&FLOW PROD.,TMS INC.
Turbonics Toester T45-HA Hydronic Under-Cabinet 4/5 Kickspace Fan Coil Heater, 5700 BTU/hr Output at 180 deg F
  • Turbonics Toester 4/5 is a space saving alternative to hot water baseboard
  • Designed to fit inconspicuously under a cabinet in the floor or in the wall
  • The Toesters fan motor is a 4-pole shaded 2-speed 110 volt 60 Hz UL approved motor
  • The heat exchanger of the Turbonics 4/5 Toester kickspace heater is copper tube type with 7 aluminum fin/Inch
  • The control is a wall mountable 2-speed on and off fan switch
  • A clip-on bi-metal snap disc heat sensing aquastat turns the fan on and off automatically
  • Black or brushed stainless finish grille front
  • Low profile
  • Standard 1/2 Inch sweat connections
  • Application flexibility in confined spaces
  • High efficiency copper/aluminum heat exchanger
  • Easily accessed electrical components
  • Factory wired reverse acting aquastat
  • Ultra-low profile fan coil draws air from a 360 deg radius and operates at either 650 or 850 rpm using the Purr-Fect air wheel for optimum balance and performance
  • 5 years limited warranty
Item#:
T45-HA
Manufacturer Item:
T45-HA
Manufacturer:
TURBONICS
Smith'S Environmental Products Quiet-One KS2008 Brown Zinc-Coated Steel Hydronic Toe Kickspace Heater, 10020 BTU/hr at 210 deg F, 120 VAC Kickspace Heaters from Smiths Environmental Products are designed to provide a unique yet purposeful solution to those "hard-to-heat" areas. With 4-sizes to choose from, the Quiet-One 2000 Series offers great flexibility and units can be matched more precisely to the demands of the job site. The Quiet-One 2000 offers high BTU output at low decibel levels. Maximum BTU output from a small footprint is the hallmark of the Quiet-One 2000 products. This ensures maximum utilization of floor and wall space in such rooms as kitchens and baths where space is at a premium.
  • 4-sizes for increased diversity as well as more effective sizing from job to job
  • Small and compact, will fit in most tight spaces or hard to heat areas, just use your imagination
  • Highly efficient, provides enhanced energy savings, increased heat transfer capability and ensures quiet reliable delivery of comfort
  • Whisper quiet, low noise, low vibration fan system with easy glide bearings, along with the famous coanda component means quiet comfort delivered time after time after time
  • Highly efficient header type coil, fully oriented to the air stream, this coil arrangement has proven its high capacity BTU/hr yield with quick heat up response under all kinds of certified conditions
  • Installer friendly, the friendliest in the industry, no need to screw our 2000 series to the floor as it comes with integral antislip antivibration floor mountings
  • Water vent is accessible through the front grille for ease of bleeding
  • Quality product with an, all new, 5 years warranty
  • The grille and exposed parts of the chassis are painted with a copper/brown baked enamel finish
  • Heat exchanger - a highly efficient, headered coil, made of copper tubes expanded into smooth aluminum plate fins (10 fins/Inch), tested at 300 psi and sealed for quality
  • High spec tangential SEL fan and motor assembly consists of high static fan wheel and scroll, detachable motor, replaceable easy glide sleeve bearings and the fan and motor cut out are protected to UL/CSA specifications
  • The KS units have integral 2-speed, max-off-min, fan switches, the LTC - low limit aquastat is also a high spec item with a close tolerance designed to close on a rise to 130 deg F and open at 110 deg F
  • 3-speed switch, 1-piece chassis, removable grill and can be converted to a wall heater
  • 650 BTU/feet at 14.5 linear feet Kickspace Heaters from Smiths Environmental Products are designed to provide a unique yet purposeful solution to those "hard-to-heat" areas. With 4-sizes to choose from, the Quiet-One 2000 Series offers great flexibility and units can be matched more precisely to the demands of the job site. The Quiet-One 2000 offers high BTU output at low decibel levels. Maximum BTU output from a small footprint is the hallmark of the Quiet-One 2000 products. This ensures maximum utilization of floor and wall space in such rooms as kitchens and baths where space is at a premium.
Item#:
KS2008
Manufacturer Item:
KS2008
Manufacturer:
EMERSON-SWAN INC
Cozy W505G Neutral Baked Enamel Heavy Gauge Steel Gravity Dual Wall Natural Gas Wall Furnace, 50000 BTU/hr
  • Wall thermostat operation
  • Continuous seam welded combustion chamber
  • 403 stainless steel ported burner provides excellent flame characteristics and quiet ignition and extinction
  • Self energizing controls
  • Low BTU pilot
  • Resettable blocked flue safety device
  • Milli-volt compatible
  • Uni-body grill construction
  • 4 Inch vent
  • 10 years warranty
  • Built-in bulb stat control
Item#:
W505G
Manufacturer Item:
W505G
Manufacturer:
COZY HEATING SYSTEMS LLC
Cozy W355E Neutral Baked Enamel 430 Stainless Steel Gravity Wall Furnace, 35000 BTU/hr
  • Wall thermostat operation
  • Continuous seam welded combustion chamber
  • 403 stainless steel ported burner provides excellent flame characteristics and quiet ignition and extinction
  • Self energizing controls
  • Low BTU pilot
  • Resettable blocked flue safety device
  • Millivolt control
  • Unibody grill construction
  • Singe wall
  • 4 Inch vent
  • 10 years warranty
Item#:
825-49
Manufacturer Item:
W355
Manufacturer:
COZY FURNACE
Cozy CDV155B 430 Stainless Steel Direct Vent Wall Furnace, 15000 BTU/hr, Matchless Spark
  • Continuous seam welded combustion chamber
  • Inner jacket suspended with U type interlocking brackets and is easily removed for cleaning
  • 403 stainless steel ported burner provides excellent flame characteristics and quiet ignition and extinction
  • 100% safety pilot/built in pressure regulator
  • Low BTU pilot
  • Matchless spark ignition
  • 9 Inch vent
  • Includes telescoping vent system fits and standard 5 Inch - 9 Inch wall thickness
Item#:
825-105
Manufacturer Item:
CDV155C
Manufacturer:
COZY HEATING SYSTEMS LLC
Cozy DVCF403B Direct Vent Counterflow Wall Furnace, 40000 BTU/hr, 320 cfm, 24 volt, Intermittent
  • Wall thermostat operation
  • Standing pilot (low BTU) or intermittent ignition system
  • Aluminized, continuous seam welded combustion chamber
  • Thermostatically controlled blower
  • Manual spark igniter
  • Resettable blocked flue safety device
  • Multi-port stainless steel burner provides excellent flame characteristics and quiet ignition and extinction
  • Mounts quickly and easily between wall stud
  • Up to 10 Inch recessible
  • Junction box provides inside upper casing to facilitate installation
  • Fan forced efficiency
Sid Harvey Item #:827-150: Replaces Part #:'s : 5161
Item#:
827-150
Manufacturer Item:
DVCF403B
Manufacturer:
COZY FURNACE
Cozy VC351A Natural Gas Closed Front Gas-Fired Vented Room Heater, 35000 BTU/hr, Push Button Piezo Ignition
Item#:
825-3
Manufacturer Item:
VC351A
Manufacturer:
COZY FURNACE
Item#:
RHL2
Manufacturer Item:
RHL2
Manufacturer:
EMPIRE COMFORT SYSTEMS, INC.
Kickspace Heaters from Smiths Environmental Products are designed to provide a unique yet purposeful solution to those "hard-to-heat" areas. With 4-sizes to choose from, the Quiet-One 2000 Series offers great flexibility and units can be matched more precisely to the demands of the job site. The Quiet-One 2000 offers high BTU output at low decibel levels. Maximum BTU output from a small footprint is the hallmark of the Quiet-One 2000 products. This ensures maximum utilization of floor and wall space in such rooms as kitchens and baths where space is at a premium.
  • 4-sizes for increased diversity as well as more effective sizing from job to job
  • Small and compact, will fit in most tight spaces or hard to heat areas, just use your imagination
  • Highly efficient, provides enhanced energy savings, increased heat transfer capability and ensures quiet reliable delivery of comfort
  • Whisper quiet, low noise, low vibration fan system with easy glide bearings, along with the famous coanda component means quiet comfort delivered time after time after time
  • Highly efficient header type coil, fully oriented to the air stream, this coil arrangement has proven its high capacity BTU/hr yield with quick heat up response under all kinds of certified conditions
  • Installer friendly, the friendliest in the industry, no need to screw our 2000 series to the floor as it comes with integral antislip antivibration floor mountings
  • Water vent is accessible through the front grille for ease of bleeding
  • Quality product with an, all new, 5 years warranty
  • The grille and exposed parts of the chassis are painted with a copper/brown baked enamel finish
  • Heat exchanger - a highly efficient, headered coil, made of copper tubes expanded into smooth aluminum plate fins (10 fins/Inch), tested at 300 psi and sealed for quality
  • High spec tangential SEL fan and motor assembly consists of high static fan wheel and scroll, detachable motor, replaceable easy glide sleeve bearings and the fan and motor cut out are protected to UL/CSA specifications
  • The KS units have integral 2-speed, max-off-min, fan switches, the LTC - low limit aquastat is also a high spec item with a close tolerance designed to close on a rise to 130 deg F and open at 110 deg F
  • 3-speed switch, 1-piece chassis, removable grill and can be converted to a wall heater
  • 650 BTU/feet at 6.97 linear feet
Item#:
KS2004
Manufacturer Item:
KS2004
Manufacturer:
EMERSON-SWAN INC
Item#:
BROAN 198
Manufacturer Item:
198
Manufacturer:
BROAN-NUTONE LLC
View: