Brand Name
Type
Temperature
Voltage
Accuracy
Amperage
Connection Type
Display Type
Power Supply
Measuring Range
View:
Fieldpiece Instruments offers several test lead solutions specifically designed for the way HVAC technicians test in the field. Our detachable probe tip silicone test leads allow you to plug one probe tip directly into the top of our stick meter, attach an alligator clip extension tip onto the COM (common lead), and test with one hand, safely and easily. Add the red alligator extension to the volts lead to perform a "no-hands" test. We also offer spring loaded test lead kits, silicone test leads, shorting cables, and a flame diode adapter kit with mini-plug adapter. Just added to our test lead line is the RCT2 extended probe tip set that allows you to test connector plugs without dismantling the connector plug as well as hard to reach test points often found on tightly packed mini-split systems. It comes in the ADK7 deluxe silicone test lead kit.
Item#:
ADK7
Manufacturer Item:
ADK7
Manufacturer:
FIELDPIECE INSTRUMENTS,INC
Item#:
E53
Manufacturer Item:
E53
Manufacturer:
SID HARVEY INDUSTRIES INC.
For real-time, instant readings techs use everyday, this pocket digital psychrometer is a must have for every HVACR professional. Wet bulb, dry bulb, dew point, and %RH are shown on the backlight, dual display, and measurements can be taken either in the duct, or while walking around.
  • Clip it to your pocket just like a pen
  • Narrow tip for insertion into ductwork
  • Twist cap protects sensors when not in use
  • Bright backlight
  • Hold, max, min (HOLD, M/m)
  • Press on/off for 3 sec to power on or off
  • HI or LO will show if measurement is out of range
  • Lo battery is displayed when below operating voltage
  • Twist bottom chrome cap to change the AA battery
  • Backlight activates on any button press
  • Press hold/M/m for 1 sec to exit mode
  • Toggle deg F and deg C with a pin through hole on back
  • Press hold/M/m and on/off together for 3 sec to disable auto-off (APO)
  • 3/8 Inch diameter x 2 Inch tip probe length
  • .1 deg F resolution
  • 165 hr typical alkaline battery life
  • 1 min auto-off
Item#:
PRH2
Manufacturer Item:
PRH2
Manufacturer:
FIELDPIECE INSTRUMENTS,INC
UEI DL479 Clamp Meter, 600 - 60 MOhm, 99.99 - 9.999 kHz, 1-1/4 Inch, The DL479 is a True RMS HVAC/R Digital Clamp-On meter designed to measure 600A AC, 750V AC/600V DC, resistance, microamps, capacitance, frequency, temperature and non-contact voltage detection. Also rated to CATIV 600V/CATIII 1000V. The DL479 includes test leads, a thermocouple probe, a zippered canvas pouch and is backed by 2-Year limited warranty.
Item#:
DL479
Manufacturer Item:
DL479
Manufacturer:
UNIVERSAL ENTERPRISES INC
UEI DL389 Digital Clamp Meter, 750 VAC/1000 VDC 400 A, 0.1 - 40 mega-ohm, The DL389 G2 Phoenix PRO+ offers contractors better features, functions and safety making it the most complete clamp meter available with True-RMS precision. Don't spend money on a True-RMS meter until you compare it to the PRO+ and ensure it provides all the functionality your job requires. Sid Harvey Item #:DL389: Replaces Part #:'s : 31851
Item#:
DL389
Manufacturer Item:
DL389
Manufacturer:
UNIVERSAL ENTERPRISES INC
Sid Harvey Item #:N29-102: Replaces Part #:'s : 6092-1
Item#:
N29-102
Manufacturer Item:
N29-102
Manufacturer:
SID HARVEY INDUSTRIES INC.
Fieldpiece Instruments ADLS2 Silicone Insulation Deluxe Test Lead, 3 feet Fieldpiece Instruments offers several test lead solutions specifically designed for the way HVAC technicians test in the field. Our detachable probe tip silicone test leads allow you to plug one probe tip directly into the top of our stick meter, attach an alligator clip extension tip onto the COM (common lead), and test with one hand, safely and easily. Add the red alligator extension to the volts lead to perform a "no-hands" test. We also offer spring loaded test lead kits, silicone test leads, shorting cables, and a flame diode adapter kit with mini-plug adapter. Just added to our test lead line is the RCT2 extended probe tip set that allows you to test connector plugs without dismantling the connector plug as well as hard to reach test points often found on tightly packed mini-split systems. It comes in the ADK7 deluxe silicone test lead kit.
Item#:
ADLS2
Manufacturer Item:
ADLS2
Manufacturer:
FIELDPIECE INSTRUMENTS,INC
Item#:
N28-55
Manufacturer Item:
N28-55
Manufacturer:
SID HARVEY INDUSTRIES INC.
The ATTPC3 pipe clamp adapter is a K-Type thermocouple accessory designed to easily grip pipes for quick temperature measurements. The rugged compact design allows for secure connection even in crowded workspaces. The probe is thermally isolated from ambient temperatures to preserve temperature accuracy. And is back by a 1-Year limited warranty.
Item#:
ATTPC3
Manufacturer Item:
ATTPC3
Manufacturer:
UNIVERSAL ENTERPRISES INC
The S365 Charging Jacket is a reliable way to charge TXV systems in cold weather. Normally, low temperatures remove too much heat from the condenser coils, so HVACR professionals should only work on TXV systems when the outside air temperature is 70 deg F or higher. Now, the new Fieldpiece Charging Jacket solves that problem, and TXV systems can be accurately charged down to 37 deg F outside temps. It's the perfect tool to dramatically extend the hours in a day, and the days in a year, where techs can install, service, and charge TXV systems. Made from parachute-grade material, the Charging Jacket is attached to the top of a split TXV system with hooks, so that the air inlet is not restricted. Then the unit is turned on the jacket puffs up from the air being forced out of the air outlet. The top is then adjusted with a drawstring until the proper pressure differential is reached between the high and low side (between 160 psi and 220 psi for R410A; and between 100 psi and 145 psi for R22). Once the systems stabilizes for 15 minutes at the correct pressure differential, the system is ready to be charged.
  • Charge TXV systems in cold weather
  • Charge TXV systems from 37 - 70 deg F outside
  • Service maintenance contracts before and after the summer heat
  • Easy to adjust to reach correct pressure differential
  • Great way to increase business during the slow season
  • Field tested for accuracy
  • Looks professional
  • Extend billable hours
  • There is no other product on the market made specifically for this purpose
  • Currently, HVACR professionals either do not work on TXV systems if it is below 70 deg F outside, or, if it's an emergency techs might use their actual jackets or cardboard to block the air inlet
  • The problem is those methods are inaccurate
  • The charging jacket's advantage is that it works to bring the pressure drop across the TXV to at least 160 psi and therefore has the same effect on the system as higher temperatures do
  • HVACR professionals can now dramatically extend their billable hours because they can work on systems during the off season
  • So instead of having the do service contract check-ups during the summer rush, service and maintenance can be start early in the spring, and continue late into the fall
  • And even year-round in many parts of the country
  • Parachute grade
Item#:
S365
Manufacturer Item:
S365
Manufacturer:
FIELDPIECE INSTRUMENTS,INC
Bacharach 0007-1644 White Short Filter Element for 24-1172, 19-3265 H2O
Item#:
0007-1644
Manufacturer Item:
0007-1644
Manufacturer:
BACHARACH INC
Item#:
B134-50
Manufacturer Item:
B134-50
Manufacturer:
SID HARVEY INDUSTRIES INC.
View: