Brand Name
Type
Diameter
Melting Point
Brazing
Size
Application
Material
Lead Free
View:
Harris® .05" X 1/8" Flat X 20" Stay-Silv®® 15 Silver Solder is ideal for most copper-to-copper or brass joints where good fit-up exists. This filler metal is excellent for situations in which close fit-up does not exist, and where agitation and vibration in service are involved
  • Alloy Material: 15% Silver 5% Phosphor 80% Copper
  • Diameter: 1/8"
  • Trade Name: Stay-Silv®
  • AWS Classification: BCuP-5
  • Solder Type: Flat Brazing Alloy Filler Metal
  • Length: 20 in
Sid Harvey Item #:T720-20: Replaces Part #:'s : T720-20A
Item#:
T720-20
Manufacturer Item:
61035
Manufacturer:
SOLDERS
Designed primarily for copper to copper and copper to brass connections the paste form is ideal for soldering tube joints. Not recommended for electrical or electronic applications due to the potential corrosive residue of the flux. Stay Clean paste flux works well with most leaded and lead-free solder compositions. Flux residue should be removed after soldering.
Sid Harvey Item #:T720-25A: Replaces Part #:'s : 14954
Item#:
T720-25A
Manufacturer Item:
SCPF4
Manufacturer:
SOLDERS
Harris 95561 Lead Free Solder, 1/8 Inch, 1 lb Spool
  • Tin-antimony solder well suited for applications where moderately elevated temperature is a factor
  • With higher electrical conductivity and high fluidity, 95/5 is recommended for lead free installation of small diameter, tight fitting connections
  • Not recommended for use on brass or HVAC connections
  • 95 - 5 tin/antimony solder is a low temperature lead free solder with a narrow melting range
  • The rapid melting characteristics require close fitting connections as it is difficult bridge or fill wide clearance
Sid Harvey Item #:T720-6: Replaces Part #:'s : 15202
Item#:
T720-6
Manufacturer Item:
10030
Manufacturer:
SOLDERS
Stay-Silv® 5 is well suited where close fit-up cannot be maintained. Stay-Silv® 5 is somewhat more ductile than Harris 0 or Stay-Silv 2
  • 1/8" X .050 X 20" brazing sticks
  • Chemical Composition: 5% Silver, 6% Phosphorus, Balance Copper
  • Specifications: AWS/A5.8 Class BCuP-3, ASMESFA5.8 Class BCuP-3, QQB-650B Class BCuP-3
  • Liquidus Temperature: 1500°F (816°C)
  • Solidus Temperature: 1190°F (643°C)
Sid Harvey Item #:T720-19: Replaces Part #:'s : 15199
Item#:
T720-19
Manufacturer Item:
5620F1
Manufacturer:
SOLDERS
Dynaflow melts and flows at temperatures very close to Stay Silv 15, and provides comparable brazed mechanical properties. This makes Dynaflow an excellent cost effective alternative to the 15% silver alloys. This premium, medium range silver alloy has been meticulously formulated to even tighter specifications than our standard copper-to-copper alloys.
Sid Harvey Item #:66000: Replaces Part #:'s : 7K918
Item#:
66000
Manufacturer Item:
D620F1
Manufacturer:
SOLDERS
Lucas-Milhaupt Sil-Fos Silvabrite 100 56761 Solder, 1/8 Inch, 440 deg F, 1 lb Spool
  • Silver-bearing solder with good strength used in potable water system applications requiring no lead
  • Flow point 660 deg F Lucas-Milhaupt Sil-Fos Silvabrite 100 56761 Solder, 1/8 Inch, 440 deg F, 1 lb Spool Sid Harvey Item #:SB100: Replaces Part #:'s : 15206
Item#:
SB100
Manufacturer Item:
56761
Manufacturer:
SOLDERS
Both Stay Brite and Stay Brite 8 produce an overall component with greater strength than a brazed component whose base metals are weakened by annealment from high brazing heat. Stay Brite solders bond with all of the ferrous and nonferrous alloys. Joints soldered with Stay Brite solders exhibit considerably higher than necessary elongation for sound, dissimilar metal joints and vibration applications.
Sid Harvey Item #:T720-12: Replaces Part #:'s : 15207
Item#:
T720-12
Manufacturer Item:
SB861
Manufacturer:
SOLDERS
The original self cleaning, lead free flux specially formulated for sweat fitting work. It removes oxidation and prepares copper, lead, brass, tin, stainless steel, cast and wrought iron for the proper bonding of solder to metal assuring leak-tight joints. It makes the solder flow freely and tin perfectly. It's recommended for all soft solder work, including 95/5. Meets federal specification 0-F-506.
Item#:
14-216
Manufacturer Item:
14-216
Manufacturer:
UTILITY ENTERPRISES
An all-purpose, low-temperature flux for use in silver brazing. Use with most ferrous and non ferrous metals, not recommended on aluminum, magnesium, and titanium.
  • Flux may be water thinned but care should be taken to avoid excess dilution
  • Flux turns clear, (transparent), close to brazing application temperature
  • Burns eyes and skin can be fatal if swallowed
  • Fukes and gases can be hazardous to your health
  • Heat rays, (infrared radiation) from flame or hot metal can injure eyes Harris Stay-Silv SSWF Flux, 6.5 oz, Brush Cap Bottle
Item#:
T720-54
Manufacturer Item:
SSWF7
Manufacturer:
SOLDERS
Lead free solder widely used in plumbing applications where lead-bearing solders are prohibited. Contains nickel, making joints tremendously strong. Wide range makes bridgit an excellent alloy for large diameter fittings and ill-fitted or non-concentric pipes. Fills gaps and caps off easily and effectively.
Sid Harvey Item #:T720: Replaces Part #:'s : 15204
Item#:
T720
Manufacturer Item:
BRGT61
Manufacturer:
SOLDERS
Lucas-Milhaupt Sil-Fos 15 95150 Brazing Rod, 20 Inch L x 0.050 Inch T x
Item#:
95150
Manufacturer Item:
95150
Manufacturer:
LUCAS-MILHAUPT WARWICK
Generac 5631 Liquid-Cooled Cold Weather Kit for Standby Generator 4.2L
Item#:
5631
Manufacturer Item:
5631
Manufacturer:
SOLDERS
View: