Brand Name
Type
Container Size
Material
View:
Nu-Foam is an expanding, polyurethane, prepolymer foam that is used as a sealant and an insulating product. It is designed to seal, fill and insulate small cracks, gaps and voids. Tack free time for Nu-Foam is less than 3 minutes at 7 deg F and 4-5% relative humidity. Its R-Value is 4.9 per" thick making a very good insulator in most any application and can even provide sound-deadening. Nu-Foam is UL classified and is fire retardant. Can withstand temperatures up to 24 deg F. It can be used to seal and insulate areas such as openings created for refrigeration, air conditioning and heating tubes or pipes, duct joints, utility penetrations in exterior sheeting, masonry, concrete or wood walls, and other areas where unwanted air penetration might occur.
  • Yields 352 linear feet (medium can) and 78 linear feet (large can) of 3/8" bead
  • Tack-free in 3 min and dries in 4 hr
  • Insulates against heat loss and heat gain
  • Fire retardant
  • Two years shelf life
  • No CFC's, no HCFC's
Item#:
4293-75
Manufacturer Item:
4293-75
Manufacturer:
NU-CALGON
Dap 44242 Fireblock Foam Polyurethane Foam Sealant , 12 oz Cartridge,
Item#:
19016
Manufacturer Item:
19016
Manufacturer:
BRAMEC CORP
Boss 812 Fire Block Foam prevents the spread of smoke and toxic gasses from one compartment to another, there by slowing down the spread of fire, due to lack of air to fuel the flames. Boss 812 has excellent insulation and acoustic properties and is also paintable (after inspection).
  • Will adhere to almost any substrate
  • Prevents the spread of smoke and toxic gasses
  • Installed in seconds, reducing labor costs by up to 90%
  • Ideal for single and two family homes
  • Paintable (after inspection)
  • Can be used on vertical or horizontal applications
  • Excellent acoustic and thermal insulation
  • Unaffected by moisture or humidity after curing
  • CFC free
  • Very cost effective
  • Reduces energy costs
  • Prevents intrusion of insects and pests
Item#:
81212
Manufacturer Item:
81212
Manufacturer:
ACCUMETRIC, LLC
Boss 813 can be used on any commercial or residential construction where the code calls for a UL system for penetration of wires, cables and metal pipes through drywall, concrete or wood. (Please consult the UL directory for a full list of approved systems). Boss 813 can also be used as a fireblock/draftstop in non-fire rated construction. Boss 813 prevents the spread of fire, smoke and toxic gasses from one compartment to another, while still maintaining the integrity of the Firewall. Boss 813 has excellent insulation and acoustic properties and is also paintable(after inspection).
  • Will adhere to almost any substrate
  • Installed in seconds, reducing labor cost by upto 90%
  • Paintable
  • Can be used on vertical or horizontal application
  • Excellent acoustic and thermal insulation
  • Unaffected by moisture or humidity after curing
  • VOC compliant / CFC free
  • Triple expanding
  • Flammability class B1 according to DIN 4102, part 1
  • Tack free time depending on temperature and humidity 5 - 10 min
  • 28.3 L freely formed
  • Cut time depending on temperature and humidity(1.2" diameter) 15 - 20 min
  • Water absorption maximum 2% volume
Item#:
81312
Manufacturer Item:
81312
Manufacturer:
ACCUMETRIC, LLC
Handi-Foam HC is a multipurpose, UL classified, one component polyurethane foam designed to fill, insulate and seal around gaps, beneath base plates, mud sills, top plate penetrations, corner joints, t-joints, exterior cracks, around utility panels, pipes, duct penetrations, etc. It is specifically designed to be dispensed as a bead for filling cracks, crevices, and to fill smaller cavities on flat or irregular surfaces. The pre-pressurized, portable one component foam system, applied in a bead form, expands and cures slowly to a semi-rigid, closed cell foam upon reaction with moisture, such as ambient humidity. Handi-Foam HC dries tack-free in approximately 8 - 10 min or less depending on moisture and temperature conditions. It fully cures within 24 hours. Handi-Foam HC adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone, oils and greases, mold release agents, and similar materials. When applied, the foam will seal, bond, insulate and protect against dust, pests, air infiltration, etc.
  • One component expanding polyurethane foam
  • Utilizes non-ozone depleting hydrocarbon propellants
  • Forms a semi rigid, closed cell foam
  • Seals, bonds, insulates and protects against dust, pests, air infiltration, etc
Sid Harvey Item #:TFI-012: Replaces Part #:'s : G80-186
Item#:
TFI-012
Manufacturer Item:
475271
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Draft-Block is a one component expanding polyurethane foam sealant that expands to 3-times its original dispensed volume. It is designed to reduce heating and cooling costs by filling and insulating openings. Draft Block is an effective acoustical sealant and reduces sound transmission. Its dielectric formula will not transmit an electric current and adheres readily to wood, glass, metal, tile, concrete and most plastics.
  • Reduces heating and cooling costs by filling and insulating openings
  • Reduces sound transmission - an effective acoustical sealant
  • Tack-free approximately 45 min after being dispensed, cures to a firm resiliency in about 8 hr at 50% relative humidity
  • Totally dielectric - will not transmit an electric current
  • Expands to 3-times its original dispensed, R-factor of 5 at 1" thickness
  • 2 years shelf life
Item#:
96500
Manufacturer Item:
96500
Manufacturer:
RECTORSEAL
View: